| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos |
| Daewoo | Puma-TT-1800 SY | 2006 | 16762 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Good | Yes | | Yes |
| Doosan | Puma-TT-1500 SY | 2006 | 16675 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Good | Yes | | Yes |
| Doosan | Puma-TT-1800 SY | 2018 | 16791 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 31iB | Excellent | Yes | | Yes |
| Doosan | Puma-TT-2000 SY | 2005 | 16668 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Good | Yes | | Yes |
| Hyundai-Kia | SKT-250 TTSY | 2010 | 16415 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | | Yes |
| Hyundai-Kia | SKT-250 TTSY | 2012 | 16315 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | | Yes |
| Mazak | Hyper Quadrex-150 MSY | 2012 | 16267 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | | Very Good | Yes | 14.3" Swing, 11.81" Turn Dia., 22.3" Centers, 5,000 RPM, 20 HP, 24 Sta. Turret, Collet Chuck, LNS Servo 80-S2 Bar Feed, Chip Conveyor, Parts Catcher, More.. | Yes |
| Mazak | Hyper Quadrex-200 MSY | 2011 | 16751 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mazatrol Matrix II | Very Good | Yes | 14.67" Swing, 13.54" Turn Dia., 33" Centers, 5,000 RPM, 30 HP, 2 - 12 Sta. Turrets, 10" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More. | Yes |
| Mazak | Integrex 200 III ST | 2004 | 16280 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mazatrol Fusion 640 MT Pro | Very Good | Yes | | Yes |
| Mazak | Integrex 200 IV ST | 2008 | 16537 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mazatrol Matrix | Good | Yes | | Yes |
| Miyano | BNE-34S3 | 2005 | 16367 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Excellent | Yes | 15" Swing, 13" SOC, 5,000 RPM, 1.34" Bar Cap., 10 HP, 12 Sta. Turret, Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, Bar Feed, More | Yes |
| Mori-Seiki | MT-2000 SZ | 2001 | 16512 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSG-501TA (Fanuc 18iT) | Very Good | Yes | 29.52" Swing, 21.6" Turn Dia., 50.47" Centers, 4,500 RPM, 40 HP, 40 ATC, 12 Sta. Turret, Collet Chucks, LNS Bar Feed, High Pressure Coolant, More.. | Yes |
| Mori-Seiki | MT-2000 SZ | 2003 | 16683 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSG-501TA (Fanuc 18iT) | Good | Yes | Swing 29.52", Swing Over C.S. 23.62", Maximum Turning Diameter 21.6", Length 40.15", 4,500 RPM, 2.5" Bar Cap., 20 HP, 12 Sta. Turret, 40 Sta. ATC, Coolant Through Spindle, More. | Yes |
| Mori-Seiki | MT-2500 SZ | 2005 | 16600 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSX-501 (Fanuc 18iM) | Very Good | Yes | Swing 35.8", Swing Over Cross Slide 23.62", Maximum Turning Diameter 21.1", Length 60.19", 2.99" Bar Cap., 4,500 RPM, 25 HP, 60 Sta. ATC, Chip Conveyor, Live Tooling, More.. | Yes |
| Mori-Seiki | ZL-253B SMC | 2003 | 16187 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mitsubishi MSC-501 (18iTA) | Good | Yes | Swing 26.77", Swing Over C.S. 20.08", Maximum Turning Diameter 15.35", Length 16.22", 3,500 RPM, 2.97" Bar Cap., 25 HP, 12 & 8 Sta. Turret, Live Tool Holder, Tool Presetter, More. | Yes |
| Nakamura-Tome | Super NJTX | 2008 | 16284 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 31i A | Excellent | Yes | | Yes |
| Nakamura-Tome | WT-100 | 2003 | 16716 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 16iTB | Good | Yes | Swing 18.9", Swing Over C.S. 12.2", Maximum Turning Diameter 12.2", Length 29", Y-Axis 2", 6,000 RPM, 20 HP, 3 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Iemca Bar Feed, More.. | Yes |
| Nakamura-Tome | WT-100 | 2016 | 16272 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 31iA | Excellent | Yes | Swing 9.6", Swing Over C.S. 7.6", Maximum Turning Diameter 6.89", Length 19.8", Y-Axis, 6,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Gantry Loader, More.. | Yes |
| Nakamura-Tome | WT-150 MMY | 2005 | 15918 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Good | Yes | Swing 10", Swing Over C.S. 7.48", Maximum Turning Diameter 7.48", Length 19.803", Y-Axis, 5,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chuck Main Spindle and Sub Spindle, Parts Catcher, Chip Conveyor | Yes |
| Nakamura-Tome | WT-300 MMY | 2005 | 16643 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | 12.2" Swing, 10.63" Turn Dia., 43.31" Centers, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck Main and Sub, Bar Feed Interface, Bar Feed, Gantry Load, More.... | Yes |
| Nakamura-Tome | WT-300 MMY | 2005 | 12637 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | 12.2" Swing, 10.63" Turn Dia., 43.31" Centers, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck Main and Sub, Bar Feed Interface, Bar Feed, More.... | Yes |
| Nakamura-Tome | WY-100 II | 2018 | 16709 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 31iA | Excellent | Yes | Swing 11.2"", Swing Over C.S. 9.6", Maximum Turning Diameter 7.48", Length 19.8", 2.44" Y-Axis, 6,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, ATS Collet Chuck Main and Sub Spindle, Chip Conveyor, More.. | Yes |
| Nakamura-Tome | WY-250 L | 2013 | 16565 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 31iA | Excellent | Yes | Swing 11.2", Swing Over C.S. 9.84", Maximum Turning Diameter 8.9", Length 35.8", Y-Axis, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chucks Both Spindles, Chip Conveyor, Much More. | Yes |
| Okuma | LT-200 MY | 2005 | 16629 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | OSP-P100L | Good | Yes | Swing 15.75", Swing Over Cross Slide 12.2", Maximum Turning Diameter 8.27", Length 21.26", 2" Bar Cap., 4,500 RPM, 15 HP, Barfeed Interface, Chip Conveyor, Parts Catcher, Live Tooling, More.. | Yes |
| Okuma | LT-200 MY | 2009 | 16349 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | OSP-E100L | Very Good | Yes | | Yes |
| Okuma | LT-300 M | 2005 | 16691 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | OSP-P100L | Good | Yes | Swing 21.65", Swing Over C.S. 18.9", Maximum Turning Diameter 13.78", Length 35", 3,800 RPM, 3" Bar Cap., 30 HP, 2-12 Sta. Turret, More. | Yes |
| Okuma | LT-3000 EX 2TMY BB | 2016 | 16518 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | OSP-P300L | Excellent | Yes | Swing Over Bed 21.65", Swing Over Cross Slide 16.3", Maximum Turning Diameter 13.78", Length 33.3", 4,200 RPM, 30 HP, 16 + 16 Sta. Turrets, 12.4" 3-Jaw Chuck Main, 10" 3-Jaw Sub, Tool Pre-Setter, More.. | Yes |
| Okuma | LU-15 MW BB | 1997 | 14472 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | OSP-7000L | Good | Yes | 20.87" Swing, 14.7" Turn Dia., 3,800 RPM, 30 HP, 12 + 8 Sta. Turret, 10" 3-Jaw Hydraulic Chuck Main, Sub-Spindle, Parts Catcher, One (1) Live Tool Holder, Big Bore Option, IGF, Bar Feed Interface, More.. | Yes |
