OkumaMachines.Com
 All The Used Okuma Machine Tools You Need - All Of The Time
 Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24/7.  All Rights Reserved .
Click Here to Bookmark this Site
All Machines Available By Type

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Mfg, Model, then Year)
Click On The Machine ID Number Below To View Machine Quote & Photos
ManufacturerModelYearMachine IDType MachineControlConditionU / PShortSpecsPhotos
DaewooPuma-1500 SY200516444LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes23.6"" Swing, 12.9" Turn Dia., 33.8" Centers, 6,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck on Main and Sub-Spindle, Chip Conveyor, Tool Presetter, Part Catcher, Parts Conveyor, MoreYes
DMG MoriNLX-2000 SY201616603LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosExcellentYes36.37" Swing, 29.72" SOC, 14.01" Turning Dia., 19.6" Turning Length, 5,000 RPM, 2.5" Bar Cap., 30 HP, Chip Conveyor, Bar Feed Interface, Twenty (20) Station Turret Option, More..Yes
DMG MoriNLX-2500 SY - 700201116585LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Parts Catcher, Bar, More.Yes
DMG MoriNLX-2500 SY - 700201716213LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMitsubishi M730UMLike NewYes Yes
DoosanPuma-2600 SY201816548LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iTDExcellentYes Yes
HaasDS-30 SSY201116558LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlVery GoodYesSwing Over Bed 31.75", Swing Over Saddle 20.75", Maximum Turning Diameter 16", Length 18", 4,800 RPM, 30 HP, 12 Sta. Turret, Y-Axis, Sub-Spindle, Live Tooling, More..Yes
HardingeConquest T-42199416369LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18TVery GoodYes21.2" Swing, 14.5" SOC, 5,000 RPM, 1.625" Bar Cap., 10 HP, 12 Sta. Turret, 16C Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, MoreYes
HardingeElite 51 MS200815681LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes
HardingeQuest 6-42 SP200615420LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 160iTGoodYes Yes
Hyundai-KiaSKT-21 LMS200916583LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTCVery GoodYesSwing 21.7"", Swing Over C.S. 13.8", Maximum Turning Diameter 10.2", Length 20.87", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Parts Catcher - Conveyor, Bar Feed Interface, More.Yes
Hyundai-KiaSKT-210 SY200616036LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes21.7" Swing, 9.5" Turn Dia., 4,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck Both Spindles, Tool Presetter, Chip Conveyor, LNS Bar Feed, More…Yes
MazakIntegrex 200 SY200016572LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MTGoodYes20.87" Swing, 19.69" Turn Dia., 30" Turn Length, 5,000 RPM, 30 HP, 40 ATC, 8" 3-Jaw Hydraulic Chuck, Coolant Through ToolYes
MazakIntegrex 300 S201216242LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixVery GoodYesSwing 33.5", Swing Over C.S. 33.5", Maximum Turning Diameter 33.5", Length 60", Y-Axis, 4,000 RPM, 40 HP, 36 Sta. Turret, Sub Spindle, Full C-Axis, 10" 3-Jaw Hydraulic Chucks, Chip Conveyor, MoreYes
MazakIntegrex i-300 S201416282LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix 2Very GoodYes Yes
MazakQuick Turn Nexus-200 MS200416493LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Chuck Air Blast, Parts Catcher, MoreYes
MazakQuick Turn Nexus-200 MS200416457LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-AxisYes
MazakQuick Turn Nexus-200 MS II200616459LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 25 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Parts Catchers, SMW Bar FeedYes
MazakQuick Turn Nexus-250 II MSY200716232LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYes Yes
MazakQuick Turn Nexus-250 MS200415821LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProVery GoodYes Yes
MazakQuick Turn Nexus-250 MSY201516451LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIExcellentYes26.5" Swing, 16.04" SOC, 14.75" Turn Dia., 21.27" Turn Length, 4,000 RPM, 3" Bar Cap., 35 HP, 12 Station Turret, 10" 3-Jaw Hydraulic Chuck Main, 6" 3-Jaw Hydraulic Chuck Sub, Bar Feed, MoreYes
MazakSuper Quick Turn-18MS Mark II199616460LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol T-PLUSGoodYes Yes
MazakSuper Quick Turn-200 MSY200116018LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes
MazakSuper Quick Turn-200 MSY200316087LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes
Mori-SeikiNL-2000 SY - 500200516524LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIVery Good Swing Over Bed 36.37", Swing Over Saddle 29.72", Maximum Turning Diameter 14.01", Length 20", 5,000 RPM, 24.7 HP, 12 Sta. Turret, 2.55" Bar Capacity, Live Tooling, Chip Conveyor, Bar Feed Interface, Tool Setter, Parts Catcher, More....Yes
Mori-SeikiNL-2500 SY - 700200916497LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 27.75", Y-Axis, 4,000 RPM, 25 HP, 12 Sta. Turrets, Sub Spindle, Full C-Axis, Chip ConveyorYes
Mori-SeikiNLX-2500 SY - 700201316567LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki M730BMVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 35 HP, 12 Sta. Turret, Parts Catcher, Bar Feed Interface, More.Yes
Mori-SeikiSL-154 SY200216586LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-805Very GoodYesSwing / Swing Over Cross Slide - 26.8" / 20.1", Maximum Turning Diameter / Length - 11.8" / 13.7", 6,000 RPM Main & Sub, 10 HP, 1.77" Bar Capacity, Collet Chuck on Main and Sub-Spindles, Bar Feed Interface, Bar Feed, Auto Parts Catcher, More..Yes
OkumaCaptain L-370 MW BB200315923LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-E100LVery GoodYesSwing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Sub-Spindle, LNS Bar Feed, Two (2) Live Holders, Loaded With Options - Low HoursYes
OkumaGenos L-300 MYW201516396LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300L-RExcellentYes20.47" Swing, 11.81" Turn Dia., 17.72" Turn Length, 3,800 RPM, 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck and 6" on Sub Spindle, Parts Catcher, Coolant Through, Loaded With OptionsYes