Machine Tools 24/7

Phone 352-799-8398 - Fax 352-799-0315

sales@machinetools247.com

 www.machinetools247.com

At Machine Tools 24/7 we never stop working to serve your machine tool needs

Use Space Provided Below For Your Notes on This Machine Quote - When Ready - Click File - Then Print on your Browser

Machine Tools 24/7 Machine Quote - Click on the Machine ID Number Below to View Then Print Machine Photos 

Below are the specs we have on file for this machine.  Please contact Machine Tools 24/7 if you have any questions.

Machine IDYearManufacturerModelControl
162842008Nakamura-TomeSuper NJTXFanuc 31i A

 DescriptionSpec Values
Capacity:Swing / Swing Over Cross Slide22.3" / 12.2"
 Maximum Cutting Diameter / Maximum Turning Length9.645" / 42.193"
 Distance Between Spindles44"
Main Spindle:Speeds20 - 4,500 RPM
 Spindle Bore / Bar Capacity / Spindle Nose3.25" / 2.625" / A2-6
 Main Motor (30 min / continuous)20 / 15 HP
Sub-Spindle:Speeds60 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose2.69" / 2" / A2-5
 Motor (30 min. / cont.)20 / 15 HP
Turrets:Number of Positions (turret one / turret two) All Live80 ATC / 12 Station
Travels:X-Axis Travel (turret one / turret two)17.9" / 8.759"
 Z-Axis Travel (turret one / turret two)42.913" / 39.560"
 Y-Axis Travel (turret one & turret two)+/- 2.755"
 B-Axis Travel (sub-spindle)42.5"
Rotary Tools:Rotary Tool Speed80 - 8,000 RPM
 Rotary Tool Motor (turret one / turret two)10 / 7 HP
Rapids:Rapid Traverse (X / Z / Y)1,181 / 1,574 / 1,024 IPM
 Sub Spindle Rapid Traverse1,574 IPM
Dimensions:Floor Space (L x W x H)160" x 88" x 98"
 Weight (approx)31,000 Lbs

 Equipped With
Additional Info.:ATS 3J Collet Chuck On Main and Sub-Spindle
 Capto C6
 1,000 PSI Coolant Pump
 Parts Catcher
 Chip Conveyor
 Bar Feed Interface
 LNS Servo S3 Bar Feed
 Tool Setter - Both Spindle
 Blum Laser Measurement System
 Renishaw Probe
 2,560Meters of Memory
 Code Generator

Type Your Notes About This Machine In The Space Below Before Printing

Take advantage of New IRS Tax Code Section 179 Depreciation says that for new and used machinery purchases up to $250,000 may be expensed in the first year…

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes.