| Type_Machine | Item_Wanted |
| AUTO CHUCKERS, SINGLE SPINDLE | Warner & Swasey 1 AC, 2 AC, 3 AC or 4 AC |
| AUTO CHUCKERS, SINGLE SPINDLE | Warner and Swasey 2AC |
| AUTO SCREW MACHINES, MULTI. SPINDLE | 1" to 1 1/4" 6 Spindle Machine |
| AUTO SCREW MACHINES, SWISS, CNC | 1.25 Round and 1.75" Hex Capability |
| AUTO SCREW MACHINES, SWISS, CNC | 2005+ Citizen A-20 or A-32 |
| AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | 2007+ Star SR-32J |
| AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | 2000+ Tsugami BS-20 |
| AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | 2002+ Star SV-32 or SR-20RIII, Must have additional axes (B & E) on the turret |
| AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Late model Citizen A-20 |
| AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | 2002+ Citizen C-16 Type VII |
| BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | LNS Servo S2 or S3, 3" x 60" Bar Feed |
| BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | LNS Quick Load Servo S2 |
| BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | Bar Feed That Handles 8' x 2 7/8" Stock |
| BEAM SPLITTERS | Beam Splitting rotary shears, The kind that splits I-Beams into T Beams |
| BENDERS, PIPE and TUBE | Tube Bender, to bend a 1-3/4" solid steel piece, 180 deg.,1 bend, short pieces. |
| BORING MILLS, HORIZ, FLOOR TYPE CNC and NC | Looking for a CNC horizontal boring mill capable of machining a 15 foot diameter 70 ton flange, Rotary Table a Plus. |
| BORING MILLS, HORIZ, TABLE TYPE | 4" or 5" machine, Rotary table a must, likes wotan's |
| BORING MILLS, HORIZ, TABLE TYPE | 5" Wotan with 72" travel and rotary table |
| BORING MILLS, HORIZ, TABLE TYPE | 1980+, 48"x 72" table, 84" cross travel, 60" vertical travel, angle head, face plate and DRO's |
| BORING MILLS, HORIZ, TABLE TYPE | 6" G & L with a facing head |
| BORING MILLS, HORIZ, TABLE TYPE | 4" Manual HBM, would consider CNC |
| BORING MILLS, HORIZ, TABLE TYPE CNC and NC | CNC HBM with 98" X, 56" Y, 36" Z Minimum Travels, Fanuc Control, Coolant Through, With or Without Rotary Table |
| BORING MILLS, HORIZ, TABLE TYPE CNC and NC | 5" Spindle, 48"+ X-Travel, 2,500+ RPM's, 50 Taper |
| BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Looking for a 1990+ Wotan Rapid or Cutmax |
| BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Looking for a CNC horizontal boring mill Floor or Table Type. 98” vertical x 144” long, with ATC, Coolant Through Spindle. |
| BORING MILLS, VERTICAL and VTL | Bullard Cutmaster 42" or 54", preferably a 3-jaw chuck |
| BORING MILLS, VERTICAL and VTL | 80" Swing, 100 RPM |
| BORING MILLS, VERTICAL and VTL | We need a 1965+ Manual VTL With a 12' to 16' Table and 100" UR |
| BORING MILLS, VERTICAL and VTL | Need a Very Nice 42" Cutmaster or Possibly a 42" Spiral Drive, Must Have a 4-Jaw Chuck |
| BORING MILLS, VERTICAL and VTL | Toshiba TX-13 or TX-16 |
| BORING MILLS, VERTICAL and VTL | 48" Swing Manual VTL |
| BORING MILLS, VERTICAL and VTL | Looking for a 1955+ 36" Bullard Cutmaster with 3 jaw chuck |
| BORING MILLS, VERTICAL and VTL | Looking for about a 36" to 40" table VTL or Lathe |
| BORING MILLS, VERTICAL and VTL | Very Nice, Late Model, Bullard 42" Cutmaster |
| BORING MILLS, VERTICAL and VTL | 100"+ Manual VTL for Retro-Fit |
| BORING MILLS, VERTICAL and VTL | Bullard 42" Spiral Drive |
| BORING MILLS, VERTICAL and VTL | Looking for a 36" Bullard Man-Au-Trol for parts |
| BORING MILLS, VERTICAL and VTL | Need a Bullard 76" Dynatrol with 5 station turret head |
| BORING MILLS, VERTICAL and VTL | Looking for a manual 42" - 50" VTL, Prefers Bullard |
| BORING MILLS, VERTICAL and VTL, CNC and NC | 48" to 60" VTL With ATC Retro-Fit Candidate, Prefer G & L |
| BORING MILLS, VERTICAL and VTL, CNC and NC | Okuma & Howa V25R (only) |
| BORING MILLS, VERTICAL and VTL, CNC and NC | Need a nice CNC VBM with at least 40" Under the Rail, Will consider machine with ATC |
| BORING MILLS, VERTICAL and VTL, CNC and NC | CNC VTL with at least 72" High Capacity, as new as possible |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 115"+ Swing CNC VTL With Live Tooling, As new as possible |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 48"+ CNC VTL, Likes Mazak MegaTurn A-12 or AS-16 with pallets, or a similar CNC machine, Pallet Changer, Live Tooling Prefered |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 2000+, O-M with 53" Swing |
| BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC | Mazak A-16 VTL |
| BRAKES, PRESS, HYDRAULIC | 8' to 10', 100 to 150 tons Hydraulic Press Brake |
| COMPARATORS | 2000+ OGP QL-30 comparator (this model only) |
| COORDINATE MEASURING MACHINES | Motorized, 12" x 12" x 10" Travels, Windows XP or newer, |
| COORDINATE MEASURING MACHINES | Looking for a Smartscope CNC 250 or Smartscope ZIP 300 with DRS-500 laser are acceptable |
| COORDINATE MEASURING MACHINES | 1999+ Renishaw Cyclone Digitizer |
| DRILLING and TAPPING MACHINES CNC | 2003+ Fanuc Robodrill A-T21, Big Plus Spindle, Would like Coolant Through Spindle or Prepped For It |
| DRILLING and TAPPING MACHINES CNC | Brother TC-32A or TC-32B |
| DRILLING and TAPPING MACHINES CNC | 2000+ Brother TC-32B |
| DRILLING and TAPPING MACHINES CNC | 2005+ Fanuc Robodrill A-T14i or A-T21i, Must have 5th Axis Rotary |
| DRILLS, GUN | New or Like new Manual 1" Capacity Gun Drill |
| DRILLS, RADIAL | 4" Hole Wizard or Similar |
| EDM - WIRE, CNC | 1999+ Agie 150 or 250 HSS |
| EDM - WIRE, CNC | Looking for a 2001+ Mitsubishi FA-20M |
| FLAME CUTTER, CNC | 4' x 8' Single Head Oxy CNC Flame Cutter |
| FLAME CUTTER, CNC | 4' x 8' or 5' x 10', two to three heads, needs to be able to cut up to 1 1/2" plate. |
| FURNACES, HEAT TREATING | Looking for a Heatreat Vacuum furnace to reach 1050 C and one big enough to hold a 18" long bar |
| GEAR GENERATORS, BEVEL, SPIRAL-HYPOID | looking for a Gould & Eberhardt 60B |
| GRINDERS, CRANKSHAFT | 12" Swing x 60" Centers |
| GRINDERS, CYLINDRICAL UNIVERSAL | Cylindrical Grinder 12" x 100" |
| GRINDERS, CYLINDRICAL UNIVERSAL | Manual or CNC, 5" - 10" Swing x 60" Centers |
| GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC | CNC OD/ID Grinder with 60K + spindle, 10" x 20" in size |
| GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC | 1999+ Studer or Mitsubishi CNC Universal Grinder with a 12" x 60" Capacity |
| GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC | Late Model Toyoda Model GU4-100 CNC |
| GRINDERS, JIG, NC and CNC | Moore (only) Five (5) Axis CNC Jig Grinder |
| GRINDERS, ROLL | 12"+ x 144" Grinder |
| GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | 6" x 18" or 12" x 24" Surface Grinders |
| GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | Okamoto ACC-1632 ST |
| GRINDERS, TOOL and CUTTER, NC-CNC | 1999+ Walter Helitronic Power, Would Like Machine with Tool Studio installed |
| GRINDERS, TOOL and CUTTER, NC-CNC | Star, Anca or Saacke 5-Axis machine |
| GRINDERS, TOOL and CUTTER, NC-CNC | 1997+ Anca 5 to 7 Axis Machine |
| GRINDERS, TOOL and CUTTER, NC-CNC | Anca RGX or TG-7 |
| GRINDERS, TOOL and CUTTER, NC-CNC | Wendt Grinder WAC 735 CENTRO with T-land geometries, auto robot system |
| HONES, HORIZONTAL | 2004+ Sunnen MBB-1660, Need a machine with Sunnen Boring Gauge |
| INJECTION MOLDING, HORIZONTAL-VERTICAL | Small Tonnage Wax Injection Machines |
| INSERTION MACHINES | Look for a Pemserter |
| INSERTION MACHINES | Pemserter Series 4 |
| IRONWORKERS | Looking for a 100 Ton Ironworker |
| IRONWORKERS | Need a good used P-50 Piranha Ironworker |
| IRONWORKERS | 100 Ton Ironworker |
| JIG MILLS, NC and CNC | 4k72, 4h72, 4h120, 4k120, 4h96 or 4k96 |
| KEYSEATER | Mitts & Merrill 3HRAFD, or other MFG with 3" Cap. And a Tilt Table |
| LASERS | Needs a Tube Laser That Does 8"+ Square Tubing (like BLM Adige LT-8) |
| LASERS | 48" x 48" Laser to cut 1/2" Stainless Steel, as new as possible |
| LASERS | 2004+ 60" x 120", 2,500 Watt, Mits, Amada, Trump or Mazak, Fume Collector |
| LASERS | 48" x 48" Laser to cut 1/8 Stainless Steel |
| LATHES, CNC, 2-AXIS, CHUCKER | Looking For a Mazak (only) M-4 or Powermaster 60" Centers, Must have Mazatrol |
| LATHES, CNC, 2-AXIS, CHUCKER | Daewoo / Doosan Puma V-550 |
| LATHES, CNC, 2-AXIS, CHUCKER | 2000+ Mori-Seiki CL-153, Must Have Parts Catcher and Bar Feed Interface |
| LATHES, CNC, 2-AXIS, CHUCKER | Haas SL-30 or SL-40 Chucker, Will consider BB Machine |
| LATHES, CNC, 2-AXIS, CHUCKER | 2005+ Haas SL-10 Without a Tailstock |
| LATHES, CNC, 2-AXIS, CHUCKER | Looking for a Mazak Nexus Quick Turn-100 Chucker |
| LATHES, CNC, 2-AXIS, CHUCKER | Need a CNC Chucker with 7.5" Bar Capacity, 12" Length Capacity, will consider manual or air chuck lathe. |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 50" Turning Diameter x 60" Centers |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking for a CNC lathe to make small parts. If possible the machine needs to run on single phase 220 v. The parts are no longer than 8" long and 3" diam |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas TL-1, TL-2 or TL-3 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2003+ Haas SL-20T |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas SL-20T Live Tool Machine |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2007+ Haas TL-2 With a Turret not just a tool post |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mazak Quick Turn-8 with T-32-2 or T-32-3 Controller |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 16 inch turning diameter and 12 to 14 foot long |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2000+ Puma-400 or something similar with a 5" spindle bore |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Late model Hardinge with Two Turrets, tailstock of sub-spindle and with or without live tooling |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas TL-1, TL-2 or TL-3 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Manual or NC Lathe with 30" - 33" Swing, 18"+ OCS and 60" - 70" Centers |
| LATHES, CNC, 2-AXIS, UNIVERSAL | We need a CNC lathe, with 60"+ swing over cross slide, 24'+ between centers and about 70,000 pound weight capacity |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2005+ Haas TL-2 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2000+ 12" Chuck, 2.1" - 3" Bar Capacity, Fanuc Control |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Daewoo Puma-240 B, parts catcher, chip conveyor |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking for a 2000+ 80" Between Centers CNC lathe with 20" min. swing, Steady Rest, Programmable Tailstock, Prefer Slant Bed, Prefer Fanuc but will consider others |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Haas SL-10T or SL-10 Chucker, Big Bore, Parts Catcher a must, Bar Feed Interface and Bar Feed if Possible. |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas SL-10 or SL-10T |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas TL-1 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mori-Seiki SL-65 or SL-75 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking for a Mori-Seiki, or Mazak with a 3.5" bar capacity, can be old machine |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas TL-2 with 3,800 RPM |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mazak Powermaster 1600 with 50" Swing in Gap |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2006+ Mori-Seiki SL-603 / 1000 with tool setter |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking for an 8" cnc lathe, Haas or Daewoo/Doosan, possibly consider Kia |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mori-Seiki SL-6B parts machine |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Universal or Chucker, 9"+ Bar Cap., Prefer Mazak |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1996+ Mazak M-5 80" or 120" Centers, 6.5" or Larger Bore |
| LATHES, CNC, 2-AXIS, UNIVERSAL | CNC Lathe With 8"+ Bar Capacity x 50" - 60" Centers, Fanuc Control |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1982+ Mori-Seiki SL-7B |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking for a Hitachi-Seiki 4NE-600 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2006+ Mazak Quick Turn-300 Nexus |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1990+ Mori-Seiki SL-75 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2002+ Tornos Deco 13A |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Hyundai HiT-30S or Hit-30 BB |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1997+ CNC Lathe With 18" or Larger Chuck, Tailstock |
| LATHES, CNC, 2-AXIS, UNIVERSAL | CNC Lathe with 8"+ Bar Capacity |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1998+ Okuma Captain or Cadet (no crowns), must have Factory Parts Catcher |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2005+ Haas SL-30T |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Daewoo Puma-700L or Puma-700LM, or other MFG's of same size lathe, 40" Swing x 126"+ Centers |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mori-Seiki SL-35B/750 or Smiliar Size Mazak, must have Tool Eye |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Need a 1998+ Haas SL-20T, Would like one with a Bar Feed |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mori-Seiki NZ1500 T2 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking For a Haas SL30T BB |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2003+ Mori-Seiki (only) 8" to 10 Chuck, Minimum 10 Station Turret |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 2005+ Mazak Quick Turn Nexus-100 M |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 2006+ Okuma Captain L-370 M |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Haas SL-20T BB or SL-30T BB with live tooling, would also need a bar feeder |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 2000+ Mazak Integrex 300 Y |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 2006+ Daewoo / Doosan Puma-700M |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 3-Axis CNC Lathe with 50"+ Centers |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 3-Axis CNC Lathe, Flat or Slant, 30"+ Cutting Capacity x 240" |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Okuma Captain With Milling, Big Bore and 200 Series Control |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Mazak Integrex 200 SY 1000 |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | 2004+ Mori-Seiki Mill Turn Center |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 2000+ Mazak 3 or 4 axis lathe with Sub-Spindle, Like a Integrex 200 |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 1998+ Mazak Nexus Quick Turn-250 MS or Super Quick Turn-250 MS |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 1997+ Miyano BNE-46 S or BNE-51S, Must have Full C-Axis |
| LATHES, CNC, 4-AXIS, CHUCKER | 2001+ Kitako MT4-200, Would consider 2001+ VT4-200 |
| LATHES, CNC, 4-AXIS, UNIVERSAL | 1999+ Okuma 4 or 5 Axis Lathe, LC-40, LC-50, LU-45, ETC . . . |
| LATHES, CNC, 4-AXIS, UNIVERSAL | 1999+ Okuma LC-50 2SC with 7.5" Bar Capacity |
| LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | 2003+ Hardinge Conquest TT-65Y or Quest 6/42 |
| LATHES, CNC, 4-AXIS, W-SUB-SPINDLE | 2003+ Mori-Seiki (only) 8" to 10 Chuck, Sub-Spindle, Two Turrets |
| LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | 2004+ Daewoo Puma-2000 SY |
| LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | 1997+ Nakamura-Tome TW-20MMY |
| LATHES, CNC, GANG STYLE | Haas GT-10 or GT-20 |
| LATHES, ENGINE | 15" Chuck, 60"+ Centers |
| LATHES, ENGINE | 20+" OCS x 120+" |
| LATHES, ENGINE | Looking for a Kingston HL-2500 |
| LATHES, ENGINE | 16" Turning Dia. X 72", Wants a Nice Lathe |
| LATHES, ENGINE | Engine Lathe with short Centers, 20" Swing and 3 1/2" Spindle Bore |
| LATHES, ENGINE | 22", 24", 26" swing x 80 " or 100" centers must have the taper attachment |
| LATHES, ENGINE | 30" Swing Over Cross Slide x 300" Centers |
| LATHES, ENGINE | 18" x 40" Engine Lathe |
| LATHES, ENGINE | Engine Lathe with 6" - 8" Bore, 500+ RPM, 100" - 160" Bed, No Taiwan or China Junk |
| LATHES, ENGINE | VDF S-500 21" x 90" - 120" Engine Lathe |
| LATHES, TURRET - SADDLE TYPE | Warner & Swasey 3A or 4A |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 1997+ Nicolas Correa FP-30/40 |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | Haas GR-510 or GR-512 |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | Looking for a 2000+ 100" x 60" x 24"+ Gantry Mill, Gimble Head, up to 10,000 RPM, Fanuc Control |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 2002+ Asquith VNG Starcut 250 |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 48" x 48" x 24" Bridge Mill with Swivel Head, as new as possible |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 2001+ 320" x 72"+ Gantry Router |
| MACHINING CENTERS, HORIZONTAL CNC | 1998+ 20" Pallets, 50 Taper, 1 Deg. Or Full 4th, 6,000 RPM, Coolant Through, Fanuc Control |
| MACHINING CENTERS, HORIZONTAL CNC | 1995+ Cincinnati Maxim-500 |
| MACHINING CENTERS, HORIZONTAL CNC | 1997+ 40" HMC, 6,000 to 10,000 RPM |
| MACHINING CENTERS, HORIZONTAL CNC | 2004+ Mori-Seiki NH-5000, 40 Taper, 14,000 RPM's with 180+ ATC and extra pallets |
| MACHINING CENTERS, HORIZONTAL CNC | 2005+ Makino A-51, Would prefer Pro 5 Control |
| MACHINING CENTERS, HORIZONTAL CNC | 2001+ 20" HMC, Full 4th, 60 ATC, 28" In Z-Travel, 50 or 63 Taper, prefer Makino or Enshu |
| MACHINING CENTERS, HORIZONTAL CNC | 2005+ Haas EC-1600 or EC-2000 |
| MACHINING CENTERS, HORIZONTAL CNC | Kitamura Mycenter HX250iF |
| MACHINING CENTERS, HORIZONTAL CNC | Late Model Okuma (only), 20" Pallets, 50 Taper, 6,000 RPM, Probe, 1 Deg. OK |
| MACHINING CENTERS, HORIZONTAL CNC | 2003+ Kitamura HX-300IF |
| MACHINING CENTERS, HORIZONTAL CNC | 2005+ 20" or large Mori-Seiki 50 Taper HMC |
| MACHINING CENTERS, HORIZONTAL CNC | 2000+ HMC with 16" Pallets, 40 Taper, 8,000+ RPM, Fanuc Only |
| MACHINING CENTERS, HORIZONTAL CNC | 2000+ Haas EC-1600, EC-2000 or HS-6, Looking for a machine without the built-in rotary table |
| MACHINING CENTERS, HORIZONTAL CNC | 2004+ Okuma (only) 20" HMC |
| MACHINING CENTERS, HORIZONTAL CNC | 2005+ Makino A-51 or A-81, Full 4th Axis, Pro-5 Control, 14,000 RPMS |
| MACHINING CENTERS, HORIZONTAL CNC | 2001+ HMC with 49"+ Pallet, Will Consider HBM with 49"+ Pallets |
| MACHINING CENTERS, HORIZONTAL CNC | 2002+ HMC with 20" - 24" Pallets |
| MACHINING CENTERS, HORIZONTAL CNC | 2004+ 20" - 24" Pallets, Okuma, Mori, Mazak, 50 Taper, Coolant Through |
| MACHINING CENTERS, HORIZONTAL CNC | 2003+ Toyoda FA-450 II |
| MACHINING CENTERS, HORIZONTAL CNC | 1995 - 1998 - 16" to 20" Pallets, 12,000+ RPMs, 40+ ATC, 40 Taper, parts and tool probe, Coolant Through Spindle, Must be full forth |
| MACHINING CENTERS, VERTICAL, CNC | 1995+ VMC with 60" x 30" Travels |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-6/40 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-4 SS |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a good VF-1 or VF-2 with side mount tool changer |
| MACHINING CENTERS, VERTICAL, CNC | Haas Mini-Mills |
| MACHINING CENTERS, VERTICAL, CNC | 5-Axis VMC with 64" x 50" x 40" Travels |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Enshu 800 or 1000, 10,000 RPM |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Mori Seiki NV-5000 or Duracenter With Coolant Through Spindle |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ Hurco VM-1 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-1, 10,000 RPM and Coolant Through |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a Haas VF-2 or VF-3 Vertical Machine Center with rotary table |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Haas VF-9/40, or other Mfg with 7,000 - 10,000 RPM, 40 Taper and 84" x 40" Travels |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VM-2 |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a 2002+ VMC with 96"+ X-Travel, Cat 50 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-3, VF-3 SS or VF-3 YT |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-3 or VF-3 SS |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Haas VF-3, VF-4 No SS models or Hurco 40" x 20" machine with WinMax Controller |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-6/40 With 5th Axis Trunion Table |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a 2001+ Kitamura Bridge Center 10 or other mfg with 80" - 110" X, 50" - 70" Y, Box Ways, 50 Taper, 10 - 12 K RPM's |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Hurco VM-1 |
| MACHINING CENTERS, VERTICAL, CNC | 2002+ Haas VF-2 SS and VF-3 SS, Side Mount ATC, Rigid Tapping, P-Cool, Auger, 10,000 RPM's or above |
| MACHINING CENTERS, VERTICAL, CNC | Matsuura MC-800V |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ VMC with 60" to 80" X-Travel & 50 Taper |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Doosan DMV-3016L, prefer machine with rotary table |
| MACHINING CENTERS, VERTICAL, CNC | Mazak VTC-20 Size machine with M-Plus Control 30" x 20" Y |
| MACHINING CENTERS, VERTICAL, CNC | Haas VF-3 |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Haas VR-11 |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-4 SS |
| MACHINING CENTERS, VERTICAL, CNC | 1999+ Daewoo DMV-500 40 or 50 Taper, Cool Through a Plus, with Fanuc Control only |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ Haas VF-3, Also need a 4th and 5th axis rotary unit |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Haas VF-2, VF-2 SS or Hurco VM-10 or VM-1E |
| MACHINING CENTERS, VERTICAL, CNC | 1995+ 30" x 16" or 40" x 20" size machine, Rigid Tapping, Tool Holders & Coolant Through a Plus |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF9/50 |
| MACHINING CENTERS, VERTICAL, CNC | 1998+ Leblond-Makino SNC-64 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-8/40 or VF-9/40 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-6/40 |
| MACHINING CENTERS, VERTICAL, CNC | 24" - X, 14" - Y, 16" - 20"-Z, 7.5 - 10 HP, 12 - 16 ATC |
| MACHINING CENTERS, VERTICAL, CNC | Haas VF-3YT / 50 |
| MACHINING CENTERS, VERTICAL, CNC | 1999 - 2002 Haas VF-5/50 or VF-6/50 With Coolant Through Spindle and Side Mount ATC |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas Mini-Mill, Mini-Mill II, Super Mini-Mill or Super Mini-Mill II |
| MACHINING CENTERS, VERTICAL, CNC | Haas VM-2 or VM-3 |
| MACHINING CENTERS, VERTICAL, CNC | Need a Haas TM-3P |
| MACHINING CENTERS, VERTICAL, CNC | Looking For a Haas TM-1 |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Mazak Nexus VCN-510C |
| MACHINING CENTERS, VERTICAL, CNC | Haas VM-2 or VM-3 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Mazak Nexus VCN-510C |
| MACHINING CENTERS, VERTICAL, CNC | Haas VF-2 milling machine with a Trunnion (5 axis machining) |
| MACHINING CENTERS, VERTICAL, CNC | Haas VF-3 or VF-4 |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a 2005+ Haas VF-2 or VF-3 |
| MACHINING CENTERS, VERTICAL, CNC | We need a Fadal VMC-4020 FX or Shizuoka B10V |
| MACHINING CENTERS, VERTICAL, CNC | 80" x 30" Can be Gantry, Can be Tilt Rotary or Gimbling Head Style |
| MACHINING CENTERS, VERTICAL, CNC | Mazak Nexus VCN-510C with a pallet changer |
| MACHINING CENTERS, VERTICAL, CNC | 90" - 100" X-Travel x 42"+ Y-Travel, C-Frame or Bridge / Gantry Machine |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a used Super Mini-Mill or Mini-Mill |
| MACHINING CENTERS, VERTICAL, CNC | 2007+ Haas VF-3 |
| MACHINING CENTERS, VERTICAL, CNC | Older Okuma VMC with 50" Table |
| MACHINING CENTERS, VERTICAL, CNC | 2004 + Haas VF-3 SS or VF-4 SS |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ Haas VF-5/50 or VF-6/50 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-2 SS or VF-3 SS |
| MACHINING CENTERS, VERTICAL, CNC | Haas Super Mini-Mill 2 |
| MACHINING CENTERS, VERTICAL, CNC | Haas TM-1 Without a Tool Changer |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-3 YT / 40, VF-5/40 or VF-6/40, Must Have Geared Head |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Dah Lih MCV-2100 |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-2, VF-2 SS, VF-3 VF-3 SS, Would Like Part and Tool Probe, Hard Drive, Ethernet, High Speed Machining, Side Mount ATC |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Haas VF-OE or VF-3 with Remote Jog Handle |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Haas VF-2, VF-3 or VF-4 With an HRT-210 Rotary |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VM-2 |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Haas VF-8/40, VF-9/40 or VF-10 |
| MACHINING CENTERS, VERTICAL, CNC | 60" X-Axis Travel, 8,000+ RPM's, Cat 40, Fanuc Control |
| MACHINING CENTERS, VERTICAL, CNC | 2002+ Haas Super Mini-Mill |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ Haas VF-8/40, Prefer West Coast Machine |
| MACHINING CENTERS, VERTICAL, CNC | Haas VM-3 or VM-4, Ethernet, Glass Scales, High Pressure Coolant Through Spindle, 10,000 RPM+, Side Mount ATC |
| MACHINING CENTERS, VERTICAL, CNC W-PALLETS | 2004+ Haas VF-4 APC or VF-6 APC, Coolant Through Spindle |
| MACHINING CENTERS, VERTICAL, CNC W-PALLETS | 1997 - 2002 Haas VF-3 APC or others MFG |
| MILLERS, PLANER TYPE, BRIDGE STYLE | looking for a Gray Futurmill with four (4) heads, a magnetic chuck, 14' to 18' long table. Does not have to be a Gray. Has to be in operating coddition |
| MILLERS, UNIVERSAL | 1997+ Bridgeport Series I or Series II |
| MILLERS, UNIVERSAL | Looking for a Bridgeport with DRO's |
| MILLERS, VERT-UNIVERSAL NC and CNC | Looking for a 10" to 12" x 50" CNC Knee Mill |
| MISCELLANEOUS COMPONENTS | Any Buffalo Angle Roll Tooling, For 1/2, 1 or 2 size machines |
| MISCELLANEOUS COMPONENTS | Brown Bravea Spindle Drive For A Kearney & Trecker HMC |
| MISCELLANEOUS COMPONENTS | Brown Bravars |
| MISCELLANEOUS COMPONENTS | Need a Turret Head for a 42" Bullard Cutmaster |
| MISCELLANEOUS COMPONENTS | Any used Cat 40 TG-100 holders with nut |
| ROLLS, ANGLE BENDING | Buffalo #4 |
| ROLLS, ANGLE BENDING | Roundo R-3, R-4 or R-5 Size Machine |
| ROLLS, ANGLE BENDING | Roundo R-8 or R-9, Looking for an 8" Size Angle Roll |
| ROLLS, ANGLE BENDING | Looking for a Roundo R-6 or R-7 |
| ROLLS, PLATE BENDING, PYRAMID TYPE | 8' x 1/2" mild steel |
| ROLLS, PLATE BENDING, PYRAMID TYPE | Roundo 10' x 1/2" or 5/8" Plate Roll |
| ROLLS, PLATE BENDING, PYRAMID TYPE | 4' x 4" or 5" Rolls to do 7 gauge or 1/4 Stainless Steel |
| SAWS, BAND, HORIZONTAL | 2006+ Hyd-Mech S-20A III or Other Mfg that is similar, prefer west coast machine |
| SAWS, BAND, HORIZONTAL | 20" Behringer, Hem or Other Must Be Double Column |
| SAWS, BAND, HORIZONTAL | Cosen C-300 NC |
| SAWS, COLD and CARBIDE | Semi-Automatic Cold Saw For 5" - 6" Tubing |
| SHEARS, CIRCLE | #45 or 45b or 60 or 60b Blue Valley Circle Shear, with a 36' throat 3/8" stainless steel capacity |
| TABLES, FLOOR and LAYOUT PLATES | Looking for floor plates 10' x 30' to 36' long, thickness can vary 8.00" to 15.00" thick |
| TABLES, FLOOR and LAYOUT PLATES | Looking for floor plates for a HBM floor mill. The ideal size would be to cover an area 32' x 18' x max of 21" deep. Must be able to precision level & clamp thru the top of plates. |
| TABLES, NC and CNC | 1998+ Haas HRT-210 Rotary |
| TABLES, NC and CNC | Haas TRT-160 5-Axis Rotary Table |
| TABLES, NC and CNC | 10" Indexer with Stand Alone Control Box |
| TABLES, NC and CNC | Looking for Fadal VH-65 DC 4th Axis Table |
| TABLES, NC and CNC | Haas TR-160 5XB |
| TABLES, NC and CNC | Looking for a Brushless Haas HA-5C |
| TABLES, NC and CNC | 2006+ Haas TR-160 5XB (tilt rotary) |
| TABLES, NC and CNC | Fadal VH-65 DC 4th Axis Table |
| TABLES, NC and CNC | Any white or grey (brushless) Haas HA-5C indexers |
| TABLES, NC and CNC | 12", 15" or 22" for a 2001 Mazak VTC-250D |
| TOOL PRESETTING MACHINES | 2000+ Zoller Genius 3 |