| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos | List |
| Brown and Sharpe | #2 | 1972 | 8197 | AUTO SCREW MACHINES, SINGLE SPINDLE | | Very Good | Yes | 1 1/4" Capacity, 3.5" Chucking Length, 3,503 RPM, 7.5 HP, 8 Position Turret, Change Gears, Coolant, Vertical Cross Slide | Yes | 1972 Brown and Sharpe #2 |
| Hardinge | Conquest ST-220 B | 2001 | 9215 | AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Fanuc 18iT | | | | | 2001 Hardinge Conquest ST-220 B Fanuc 18iT |
| Hardinge | Conquest ST-225 | 2000 | 9214 | AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Fanuc 18iT | | | | | 2000 Hardinge Conquest ST-225 Fanuc 18iT |
| Hardinge | Conquest ST-225 B | 2001 | 9213 | AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Fanuc 18iT | Very Good | Yes | | On Way | 2001 Hardinge Conquest ST-225 B Fanuc 18iT |
| Tsugami | BE-19 | 2007 | 7773 | AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Fanuc 32iA | Excellent | Yes | Work Diameter 0.118" - 0.748", 200 - 12,000 RPM, 5 HP Main 2.95 HP Sub, Live Tooling, 12' Minuteman 320 Bar Feed, Indexing Brake On Back Spindle, Chip Conveyor, Angle Mounted High Speed Spindles (NSK variable frequency up to 60k rpm), 2,233 Run Tim and 1,481 Cutting Hours | Yes | 2007 Tsugami BE-19 Fanuc 32iA |
| Tsugami | BS-26C Mark III | 2007 | 8151 | AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Fanuc 18iTB | Very Good | Yes | | Yes | 2007 Tsugami BS-26C Mark III Fanuc 18iTB |
| Haas | Servo Bar 300 | 2004 | 6416 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Excellent | Yes | Bar Capacity 1/4" to 3-1/8", Maximum Bar Length 60", Barfeed in Very Good Condition | Yes | 2004 Haas Servo Bar 300 |
| Iemca | AS 325 Type 52 | 2002 | 8195 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Excellent | Yes | 0.118" to 0.98425" Capacity, 205" Bar Length | Yes | 2002 Iemca AS 325 Type 52 |
| LNS | Quick Load Servo S2 | 2001 | 8310 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Like New | | | Yes | 2001 LNS Quick Load Servo S2 |
| SMW | Space Saver 2100 | 1998 | 7836 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Very Good | Yes | 1/4 - 3 1/4" Bar Capacity, 4" - 48" Bar Length, Servo Driven, Two (2) Pushers, Manuals | Yes | 1998 SMW Space Saver 2100 |
| Giddings and Lewis | G-50-TX | 1981 | 7677 | BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC | Giddings & Lewis 800B | Good | Yes | 5" Spindle, 50 Taper, 1,400 RPM, 30 HP, 96" x 72" 36" x 56" Travels, Two (2) 48" x 72" Pallet Shuttle Tables, Full Forth Rotary Table, 100 ATC, Steel Way Covers, Chip Conveyor | Yes | 1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B |
| Mitsubishi | MQF-150 | 1981 | 7393 | BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC | Allen Bradley 7320 | Neds Repair | No | 5.905" Spindle, 50 Taper, 2,000 RPM, 50 HP, 137.79" x 86.61" x 13.77" x 27.55" Travels, 42" x 140" Table, Hydrostatic Bearings All Axes, Full Three Axis NC Control, Chip Conveyor | Yes | 1981 Mitsubishi MQF-150 Allen Bradley 7320 |
| Giddings and Lewis | 330 | 1948 | 6637 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes | 1948 Giddings and Lewis 330 |
| Giddings and Lewis | 330-T | 1967 | 6636 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes | 1967 Giddings and Lewis 330-T |
| Giddings and Lewis | 350-T | 1952 | 6635 | BORING MILLS, HORIZ, TABLE TYPE | | Good | No | 5" Spindle, # 6 Morse, 375 RPM, 15 HP, 60" x 120 Table, 108" x 60" x 36" x 96" Travels, Three (3) Axis DRO's, Outrigger Support | Yes | 1952 Giddings and Lewis 350-T |
| PBR | AF-90 | 1967 | 8933 | BORING MILLS, HORIZ, TABLE TYPE | | Very Good | Yes | 3 1/2" Spindle, BT 45 Taper, 1,500 RPM, 15 HP, 58" x 48" x 22" x 60" Travels, 47" x 37" Rotary Table, Tailstock, 11" Spindle Support, Accurite III 2-Axis DRO, Coolant System, Pendant Control, Quick Change Spindle, Outer Bearing Column, Power Draw Bar, Facing Head Available | Yes | 1967 PBR AF-90 |
| Lucas | Model 441B | 1976/02 | 6891 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Mitsubishi Meldas M-330HM | Very Good | Yes | 4" Spindle, 25 HP, 1,450 RPM, 50 Taper, 84" x 48" x 30" x 48" Travels, 48" x 84 Table, 25" x 25" Full 4th Rotary Table, Rotary Tilt 135°, Power Draw Bar, Rotary Resolvers, Ball Screws All Axes, Pendant Mounted Control, Machine Completely Remanufactured In 2002, Calibrated to ISO 9000 Specs | Yes | 1976/02 Lucas Model 441B Mitsubishi Meldas M-330HM |
| Giddings and Lewis | PC-50 | 1994 | 8534 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Giddings & Lewis 8000B | Very Good | Yes | 5" Spindle, 25 HP, 3,000 RPM, 50 Taper, 72" x 54" x 30" x 50" Travels, 100 ATC, Full 4th, Two (2) 48" x 48" Pallets, Outrigger Saddle Supports, Power Draw Bar, Hardened Bed Ways, Coolant Through Spindle, Dual Chip Conveyors, Remote Jog Handle | Yes | 1994 Giddings and Lewis PC-50 Giddings & Lewis 8000B |
| Bullard | 36" Dynatrol | 1964 | 7889 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 36" 3-Jaw Chuck, 48" Swing, 30" Under Rail, 3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All Directions, Full Pendant Control, Hardened and Ground Ways | Yes | 1964 Bullard 36" Dynatrol |
| Bullard | 36" Man-Au-Trol | 1957 | 7238 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1957 Bullard 36" Man-Au-Trol |
| Bullard | 36" Spiral Drive | | 8413 | BORING MILLS, VERTICAL and VTL | | Godd | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | | 8142 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | | 8143 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | 1958 | 6730 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1958 Bullard 36" Spiral Drive |
| Bullard | 42" Cutmaster | 1954 | 6223 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes | 1954 Bullard 42" Cutmaster |
| King | 62" | 1948 | 8285 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 62" Table, 72" Swing, 62" Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66" 4-Jaw Manual Chuck, Pendant Control | Yes | 1948 King 62" |
| Pensotti | KN-950 | 1968 | 9103 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | 34" 4-Jaw Chuck, 36" Swing, 35.43" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head | Yes | 1968 Pensotti KN-950 |
| Amera-Seiki | VT-1000T | 2008 | 7699 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTC | New | Yes | | Yes | 2008 Amera-Seiki VT-1000T Fanuc OiTC |
| Amera-Seiki | VT-1100T | 2009 | 8713 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTC | New | No | | Yes | 2009 Amera-Seiki VT-1100T Fanuc OiTC |
| Amera-Seiki | VT-600L-MC | 2007 | 8205 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTC | Like New | Yes | | Yes | 2007 Amera-Seiki VT-600L-MC Fanuc OiTC |
| Giddings and Lewis | 48" | 1970/2008 | 8448 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fagor 8055 | Excellent | Yes | 48" Table, 60" Swing, 60" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids, Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted, Coolant System, Programmable Rail Head Elevation, Toolholders, CNC Controlled Turret Head With Heidenhain Rotary Encoder Feedback, Hydraulic Clamping on Rail Head | Yes | 1970/2008 Giddings and Lewis 48" Fagor 8055 |
| Giddings and Lewis | 72" | 1986 | 8453 | BORING MILLS, VERTICAL and VTL, CNC and NC | GE 1054 | Good | Yes | | Yes | 1986 Giddings and Lewis 72" GE 1054 |
| Gray | RM 66 | 1980/08 | 8222 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiT | Rebuilt | Yes | 66" Table, 72" Swing, 66" Under Rail, 272 RPM, 50 HP, Single Turret Head, 66" 4-Jaw Manual Chuck, Chip Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50 HP AC Spindle Motor | Yes | 1980/08 Gray RM 66 Fanuc OiT |
| Stanko | 55" | 1964/1995 | 8946 | BORING MILLS, VERTICAL and VTL, CNC and NC | NUM-1060 | Very Good | Yes | 55.11" Table, 62.99" Swing, 39.37 Under Rail, 13,800 Table Load, 75 HP, Five Sided Turret, Tool Holders, Coolant System, Coolant & Chip Guarding Enclosure, Turret Load / Unload Operator Station, Full Three Axis CNC Control, Power Indexing Turret Head | Yes | 1964/1995 Stanko 55" NUM-1060 |
| Amera-Seiki | VT-1600 | 2009 | 8003 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iTB | New | Yes | | Yes | 2009 Amera-Seiki VT-1600 Fanuc 18iTB |
| HNK | HKNT-16/20 | 2002 | 8630 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18TC | Very Good | Yes | | Yes | 2002 HNK HKNT-16/20 Fanuc 18TC |
| Pacific | 100-10 | 1985 | 7100 | BRAKES, PRESS, HYDRAULIC | | Good | Yes | | Yes | 1985 Pacific 100-10 |
| Pacific | 200-10 | 1966 | 7099 | BRAKES, PRESS, HYDRAULIC | | Good | Yes | 200 Tons, 10' Bed, 8' 4" Between Housings, 7.5" Stroke, 25 HP, Hurco AutoBend 5 Back Gauge | Yes | 1966 Pacific 200-10 |
| Wysong | PH-6096 | 1996 | 9134 | BRAKES, PRESS, HYDRAULIC | Wysong GC 6000 | Very Good | Yes | 60 Tons, 1/4" Mild Steel Capacity, 8' Bed, 104" Between housings, 6" Stroke, 15" Open Height, 300 IPM Approach, 22 IPM Working, 225 IPM Return, 15 HP, 24" Two (2) Axis CNC Back Gauge, Operator Control Pedestal, Flush Mount Frame | Yes | 1996 Wysong PH-6096 Wysong GC 6000 |
| Chicago | Model 68-B | 1978 | 8449 | BRAKES, PRESS, MECHANICAL | | Good | Yes | | Yes | 1978 Chicago Model 68-B |
| Milwaukee | 3045-5 | | 8626 | BRAKES, PRESS, MECHANICAL | | Good | Yes | | Yes | Milwaukee 3045-5 |
| Colonial Broach | VDS-6-36 | 1994 | 7139 | BROACHES, VERTICAL, PULL DOWN | | Good | Yes | | On Way | 1994 Colonial Broach VDS-6-36 |
| Koolant Koolers | HAF7500SP-ST | 1991 | 6938 | CHILLERS | | Very Good | No | 100,000 BTU, 36 GPM, 70 Gallon Resevoir, Chiller Motor 7.5 HP, Coolant Motor 1.5 HP | Yes | 1991 Koolant Koolers HAF7500SP-ST |
| --Select Mfg Here-- | 22" 3-Jaw Hydraulic | 1995 | 6606 | CHUCKS, POWER | | Good | | 22" 3-Jaw Hydraulic, Chuck, Draw Tube, and Chuck Face Plate, Chuck Off a 1995 Mori-Seiki SL-65B | Yes | 1995 --Select Mfg Here-- 22" 3-Jaw Hydraulic |
| Jones and Lamson | FC-14 | | 8900 | COMPARATORS | | Very Good | Yes | | Yes | Jones and Lamson FC-14 |
| ChipBlaster | Vega 2000 | 2000 | 7875 | COOLANT FILTERING SYSTEMS | | Very Good | Yes | Maximum Pressure - 2,000 PSI, Maximum Flow Rate - 13 GPM, Mitubishi Microprocessor, Dual Filtration Tanks | Yes | 2000 ChipBlaster Vega 2000 |
| Knoll | SF 2000/F60-4 | 2005 | 8305 | COOLANT FILTERING SYSTEMS | | Excellent | Yes | | Yes | 2005 Knoll SF 2000/F60-4 |
| Knoll | VRF 450/550 | 2006 | 8304 | COOLANT FILTERING SYSTEMS | | Excellent | Yes | | Yes | 2006 Knoll VRF 450/550 |
| Transor | FWC-110-TRP | 2004 | 8907 | COOLANT FILTERING SYSTEMS | | Very Good | Yes | | Yes | 2004 Transor FWC-110-TRP |
| Brown and Sharpe | Leitz PMM-G 3D | 1999 | 8008 | COORDINATE MEASURING MACHINES | | Very Good | Yes | | Yes | 1999 Brown and Sharpe Leitz PMM-G 3D |
| Brown and Sharpe | Micro-Xcel PFX 4-5-4 DCC | 1997 | 8327 | COORDINATE MEASURING MACHINES | | Very Good | Yes | 22" x 30" x 17" Table, 18" x 20" x 16" Travels, Computer With MM4 Software, Digitizing and Scanning Capabilities, B & S Controller, Computer, Joystick Control | Yes | 1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC |
| Brown and Sharpe | One 7.7.5 | 2006 | 8831 | COORDINATE MEASURING MACHINES | | Very Good | Yes | | Yes | 2006 Brown and Sharpe One 7.7.5 |
| Brown and Sharpe | Validator | 1986 | 8765 | COORDINATE MEASURING MACHINES | | Good | Yes | | Yes | 1986 Brown and Sharpe Validator |
| Brown and Sharpe | Xcel 7-10-7 | 1989 | 8372 | COORDINATE MEASURING MACHINES | | Very Good | Yes | | Yes | 1989 Brown and Sharpe Xcel 7-10-7 |
| Renishaw | Cyclone Digitizer | 1999 | 8174 | COORDINATE MEASURING MACHINES | | Very Good | Yes | 26" x 25" x 18" Table, 23.6" x 19.7" x 15.7" Travels, Computer With Software, Extra Fixtures, Full Digitizing Capabilities | Yes | 1999 Renishaw Cyclone Digitizer |
| Brother | TC-324 | 1996 | 6754 | DRILLING and TAPPING MACHINES CNC | Brother CNC 630 | Good | Yes | 33.1" x 19.7" Table, 16.5" x 12.6" x 10.2" Travels, 10,000 RPM, 30 Taper, 6 HP, 10 ATC, Quick Table Two Surface Pallet Changer | Yes | 1996 Brother TC-324 Brother CNC 630 |
| Hyundai | SPT-V30TD | 1999 | 8435 | DRILLING and TAPPING MACHINES CNC | Yasnac J-50M | Very Good | Yes | Tables - 23.62" x 17.7, Travels - 19.68" x 11.81" x 11.81", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow, EIA / ISO, RS-232 Port Programming, Splash Guard | Yes | 1999 Hyundai SPT-V30TD Yasnac J-50M |
| Miyano | MTV-C310 | 1998 | 5974 | DRILLING and TAPPING MACHINES CNC | Yasnac M-100 | Very Good | Yes | Table - 18.9" x 14.17", 15.75" x 11.81" x 9.84" Travel, 16,000 RPM, 30 Taper, 15 ATC, Rigid Tapping, RS-232 Port, Miscellaneous Tool Holders and Manuals | No | 1998 Miyano MTV-C310 Yasnac M-100 |
| Carlton | 4A | 1954 | 9269 | DRILLS, RADIAL | | Very Good | Yes | | Yes | 1954 Carlton 4A |
| Cegielski (Polamco) | GRV-554 | 1980 | 7552 | DRILLS, RADIAL | | Very Good | Yes | 8' Arm, 18" Column, 68.9" Under Spindle, 20 HP, 1,600 RPM, Drilling Capacity Mild Steel 2.5", Drilling Capacity Mild Cast 3.1", Box Table, Power Clamping, Power Elevation | Yes | 1980 Cegielski (Polamco) GRV-554 |
| Air Quality Engineering | AQE 4000 | 2004 | 8896 | DUST COLLECTORS | | Very Good | No | | Yes | 2004 Air Quality Engineering AQE 4000 |
| ChipBlaster | MistBlaster | 2000 | 7876 | DUST COLLECTORS | | Very Good | Yes | Maximum CFM - 1,200 CFM, Suction Inlet - 10" Intake, Liquid Return, Can Be Run As Stand Alone Unit or with ChipBlaster Unit, M-Code Controlled | Yes | 2000 ChipBlaster MistBlaster |
| Charmilles | Roboform 20 | 1991 | 9382 | EDM - RAM, CNC | Charmilles | Good | Yes | | On Way | 1991 Charmilles Roboform 20 Charmilles |
| Mitsubishi | M-25-J | 1993 | 8625 | EDM - RAM, CNC | Mitsubishi Control | Very Good | Yes | 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 55 Amp, System 3-R Tooling, 1 Meg of Memory, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Filtration Unit, 3.5" Floppy Drive | Yes | 1993 Mitsubishi M-25-J Mitsubishi Control |
| Sodick | A3C | 1986 | 9355 | EDM - RAM, CNC | Sodick Mark VII | Good | Yes | | Yes | 1986 Sodick A3C Sodick Mark VII |
| Charmilles | Robofil 240 | 2001 | 7035 | EDM - WIRE, CNC | Charmilles | Very Good | Yes | | Yes | 2001 Charmilles Robofil 240 Charmilles |
| Charmilles | Robofil 510 | 1995 | 7125 | EDM - WIRE, CNC | Charmilles | Parts Machine | No | | Yes | 1995 Charmilles Robofil 510 Charmilles |
| Mitsubishi | DWC-90HA | 1993 | 8709 | EDM - WIRE, CNC | Mitsubishi | Very Good | Yes | Table 20" x 16.53", Work Area 15.75" x 13.78" x 6.30", Travel 11.81 x 9.84" x 10.1, 25 Amp, Wire Alignment Device, Power Supply (G25), Dielectric Fluid Reservoir With Cooler, Manual Pulse Generator | Yes | 1993 Mitsubishi DWC-90HA Mitsubishi |
| Mitsubishi | FX-10 | 1998 | 8955 | EDM - WIRE, CNC | Mitsubishi | Good | Yes | | Yes | 1998 Mitsubishi FX-10 Mitsubishi |
| Mitsubishi | FX-10 K | 1999 | 9265 | EDM - WIRE, CNC | Mitsubishi | Good | NO | | Yes | 1999 Mitsubishi FX-10 K Mitsubishi |
| Sodick | A-500 WP | 1996/2005 | 9357 | EDM - WIRE, CNC | Sodick Mark-21 | Excellent | Yes | Tank - 30" x 18" x 12", Travels - 19.685" x 13.8" x 10.63", 50 Amp, Floppy Drive, Simultaneous U-V Taper Control, Chiller, APT Programmer, Automatic Wire Threading, Machine Refurbished in 2005, Very Little Use Since | Yes | 1996/2005 Sodick A-500 WP Sodick Mark-21 |
| Sodick | AP-500 | 1998 | 8824 | EDM - WIRE, CNC | Sodick Mark-25 | Good | Yes | Work Area 27.5" x 19.7" x 10.2", Travel 19.7 x 13.8" x 10.26, 40 Amp, AWT, APT Background Programming, Submerged Cutting, Glass Scales, RS-232 Port, 320 Meg Hard Drive | Yes | 1998 Sodick AP-500 Sodick Mark-25 |
| Torchmate | Torchmate 3 | 2008 | 9190 | FLAME CUTTER, CNC | Torchmate | Like New | Yes | 48" x 96" Cutting Capacity, 1/4" - 1 1/2" Plasma Cutting Capacity, Hypertherm 1650 Head, Automatic Height Control Sensing On Plasma Head To Prevent Warping | Yes | 2008 Torchmate Torchmate 3 Torchmate |
| Cummins | PowerHouse - DQKC | 2000 | 7063 | GENERATORS, A.C., DIESEL DRIVEN | | Very Good | Yes | Cummins - PowerHouse - DQKC, Output - Stand-By / Prime / Continuous (Kva) 2,500 / 2,281 / 2,000, Cummins Diesel, Onan 508 Generator, Custom Skid Mount Sound Enclosure (sound rating 75 Db @ 1 meter), Remote Radiator Cooling System, Digital Power Distribution Control Panel, Sunbelt Generator 480v @ 2,500 Kva Boost Output to 12,500v, Battery Charger and Stand-By Batteries, Completely Automatic Start-up and Operation, 20 to 25 Hours On Unit | Yes | 2000 Cummins PowerHouse - DQKC |
| Cincinnati | DE | 19?? | 8484 | GRINDERS, CYLINDRICAL UNIVERSAL | | Fair | Yes | | Yes | 19?? Cincinnati DE |
| Karsten | KC-AS 1600 | 1975 | 8353 | GRINDERS, CYLINDRICAL UNIVERSAL | | Good | Yes | 14.17" Work Dia., 63" Length, 14.74" x 4" x 5" Wheel, Internal Spindle, Pendant Control, Wheel Dresser, Barnes Coolant Filtration System, Holding Tight Tolerances of +/- .00025 | Yes | 1975 Karsten KC-AS 1600 |
| Okuma | GA-44 | 1992 | 9050 | GRINDERS, CYLINDRICAL, NC and CNC | OSP-5020G | Good | No | | Yes | 1992 Okuma GA-44 OSP-5020G |
| K.O. Lee | S1024523 | 2000 | 8224 | GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC | Leematic | Very Good | No | 24" x 10" Table, 28" x 11 3/4" Travels, 5 HP, 1,900 RPM, Leematic Programmable Control, Table Speed Flow Control Valves, Spindle RPM and Load Indicator, Separate Coolant Tank and Pump, Magnetic Chuck | Yes | 2000 K.O. Lee S1024523 Leematic |
| Tru Tech | TT-8000 | 2003 | 7837 | GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC | Tru Tech | Like New | Yes | 18" x 6" Chuck, 12" x 6" Travels, 3 HP, Pentium IV Computer, Pick-N-Place Talking Software With Built-In Program Self-Training, Fully Programmable Variable Speed Workhead, Diamond Grinding Wheel, Mounted and Balanced on Flange, Wheel Dressing Attachment, Balancing Arbor, Coolant Tank With Filter System and Hoses, 3" Ultra-Precision Grinding Unit, Through Feed Attachment For Centerless Grinding Work, Multiple Plunge, OD, ID, And Contour Grinding Capabilities, Mist Buster 500 | Yes | 2003 Tru Tech TT-8000 Tru Tech |
| Harig | 618 EZ Surf | 1998 | 8574 | GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | Bridgeport | Very Good | Yes | 18" x 6" Walker Magnetic Chuck, 12" Under Wheel, 19" x 6 3/4" Travels, 1 HP, 100 FPM, Wet Grinding Attachment With Pump and Tank, Bridgeport PC Based Programmble Control | Yes | 1998 Harig 618 EZ Surf Bridgeport |
| Okamoto | 820A | 1999 | 9270 | GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | | Very Good | Yes | 18" x 6" Walker Magnetic Chuck, 14" Under Wheel, 20" x 8" Travels, 1 1/3 HP, 100 FPM | Yes | 1999 Okamoto 820A |
| Blanchard | Model 22H-D-42 | 1980 | 8491 | GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL | | Very Good | Yes | 42" Table, 48" Swing, 23" Height Under Wheel, 22" Grinding Wheel, 720 RPM, 100 HP, Neutrifier Magnetic Chuck Control, Segmented Grinding Wheel, Dry Base Besign with Polycon Filtration, External Coolant Filtration System and Sludge Conveyor | Yes | 1980 Blanchard Model 22H-D-42 |
| Royal Oak | D-S | 1961 | 8527 | GRINDERS, TOOL and CUTTER | | Good | Yes | | Yes | 1961 Royal Oak D-S |
| Anca | RG-7 | 1998 | 8841 | GRINDERS, TOOL and CUTTER, NC-CNC | Anca System 32 | Very Good | Yes | Min. - Max. Tool Dia. / Length - .079 - 6" / 13", Travels - 13.386" x 9.449" x 9.449" x 9.449", A-Axis Length / Rotation / Taper - 5.9" / 360° / ISO 50, Hoffman 600 CFM Mist Collector, PROjection Fluting, Large Selection of Tooling Including Mandrels, Collets, Wheels, Etc, Step Tool Package, Many Other Options, Machine Rebuilt by Anca in 2004, Not Used Since | Yes | 1998 Anca RG-7 Anca System 32 |
| Anca | TG-4 Fastgrind | 1994 | 8164 | GRINDERS, TOOL and CUTTER, NC-CNC | Anca Series 2000 | Good | Yes | Max. Swing 3.15", Max. Length 15.86", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1" Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End Production End Mill Software (all end mills, conical taper, wordriff) | Yes | 1994 Anca TG-4 Fastgrind Anca Series 2000 |
| Sentry | TG-410 | Year? | 8908 | GRINDERS, TOOL and CUTTER, NC-CNC | Autocon CNC | Very Good | Yes | | No | Year? Sentry TG-410 Autocon CNC |
| Star | ATG-6DC | 1990 | 7280 | GRINDERS, TOOL and CUTTER, NC-CNC | | Very Good | Yes | | | 1990 Star ATG-6DC |
| Star | ETG | 2007 | 8905 | GRINDERS, TOOL and CUTTER, NC-CNC | | Very Good | Yes | Max. Tool Dia. / Length - .3.937" / 11", Travels - 11.8" x 8.7" x 22", A-Axis Rotation / Taper - 360° / ISO 50, 10,000 RPM, 15 HP, NUMROTOplus Part Probing Software, NUMROTOplus 2D Grinding Simulation, Closed Loop Chiller on Grinding Spindle & Headstock, Glass Scales on All Linear Axes, HSK Wheel Mounting, Integrated Auto Load and Unload System - Too Many Option To List - Check Out The Full Quote | Yes | 2007 Star ETG |
| Star | PTG-512 | 2005 | 8906 | GRINDERS, TOOL and CUTTER, NC-CNC | | Very Good | Yes | Max. Tool Dia. / Length - .3.937" / 21", Travels - 11.8" x 8.7" x 22", A-Axis Rotation / Taper - 360° / ISO 50, 10,000 RPM, 30 HP, NUMROTOplus Part Probing Software, NUMROTOplus 2D Grinding Simulation, Closed Loop Chiller on Grinding Spindle & Headstock, Glass Scales on All Linear Axes, HSK Wheel Mounting - Too Many Option To List - Check Out The Full Quote | Yes | 2005 Star PTG-512 |
| Unison | 4000 Super TruFlute | 1996 | 5967 | GRINDERS, TOOL and CUTTER, NC-CNC | | Good | No | Max. Swing 14", Max. Length 12", 14" x 8" x 13.5" Travels, 10 HP, A & C Axis, Operating Only With Oil, Drill, End Mill, Step Tool and Burr Software, New Spindle Installed 10/13/06 | Yes | 1996 Unison 4000 Super TruFlute |
| Walter | Helitronic Power | 1996 | 7882 | GRINDERS, TOOL and CUTTER, NC-CNC | Walter HMC 400 | Fair | Yes | Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock | Yes | 1996 Walter Helitronic Power Walter HMC 400 |
| Walter | Helitronic Power | 1996 | 7883 | GRINDERS, TOOL and CUTTER, NC-CNC | Walter HMC 400 | Good | Yes | Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock | Yes | 1996 Walter Helitronic Power Walter HMC 400 |
| Walter | Power Production | 1997 | 7711 | GRINDERS, TOOL and CUTTER, NC-CNC | Walter HMC 400 | Good | Yes | Maximum Tool Diameter / Length - 12.59" / 14.46", Walter HMC 400 Control, Windows DOS Packages 1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression Equipment | Yes | 1997 Walter Power Production Walter HMC 400 |
| Geka | Hydracrop 110/AD | 2006 | 9276 | IRONWORKERS | | | | | Yes | 2006 Geka Hydracrop 110/AD |
| Piranha | P-50 | 1999 | 8836 | IRONWORKERS | | Very God | Yes | 50 Tons, 60 SPM, 3/4" Punch Cap., 5" x 5 x 3/8"Angle Shear Cap., 15" x 5/8" Flat Shear Cap., 1/4" - 1 1/2" Round Bar Cap., 1/2" - 1" Square Bar Cap., Miscellaneous Tooling | Yes | 1999 Piranha P-50 |
| Cincinnati | CL5-350 | 1991 | 9002 | LASERS | Fanuc | Good | No | | On Way | 1991 Cincinnati CL5-350 Fanuc |
| Mitsubishi | ML2512-LXP | 1996 | 9112 | LASERS | Mitsubishi LC10BV | Very Good | Yes | 48" x 96" Tables, 98.425" x 49.2" x 3.937" Capacity, 2,000 Constant and 3,000 Watts Pulse Resonator, Factory Installed Pallet Changer With Sheet Lifter, Accuchiller, Remote Jog Handle, Resonator Rebuilt In 2007 | Yes | 1996 Mitsubishi ML2512-LXP Mitsubishi LC10BV |
| Mitsubishi | ML2512-LXP | 1996 | 7528 | LASERS | Mitsubishi LC10BV | Good | Yes | Two 48" x 96" Tables, 98.4" x 49.2" x 3.93" Travels, 3020D Resonator, 2,000 Watts, Factory Installed Pallet Changer With Sheet Lifter, High Pressure Assist Gas, Accuchiller, Non-Contact Cutting Head With Optional Auto Focus Pre-Set | Yes | 1996 Mitsubishi ML2512-LXP Mitsubishi LC10BV |
| Mitsubishi | ML2512-LXP | 1998 | 8450 | LASERS | Mitsubishi LC10BV | Very Good | Yes | Two 48" x 96" Tables, 98.4" x 49.2" x 3.93" Travels, 3020D Resonator, 2,000 Watts, Factory Installed Pallet Changer With Sheet Lifter, High Pressure Assist Gas, Accuchiller, Non-Contact Cutting Head With Optional Auto Focus Pre-Set, Remote Jog Handle | Yes | 1998 Mitsubishi ML2512-LXP Mitsubishi LC10BV |
| Mazak | Powermaster 1100 | 1979/2009 | 8658 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 18T | Rebuilt | Yes | | Yes | 1979/2009 Mazak Powermaster 1100 Fanuc 18T |
| Mori-Seiki | CL-200B | 1997 | 8462 | LATHES, CNC, 2-AXIS, CHUCKER | MSC-803L | Very Good | Yes | Swing Over Bed 20.3", Swing Over Saddle 9.5", Maximum Turning Diameter 16.14", Length 14.6", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock, Parts Catcher, 8" 3-Jaw Chuck, Chip Conveyor, Iemca TAL 12' Bar Feed, Oil Mist Extraction Unit, Specialized 12’ Bar Carrier With Crane | Yes | 1997 Mori-Seiki CL-200B MSC-803L |
| Mori-Seiki | SL-8F | 1984 | 8953 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 11T | Good | Yes | | Yes | 1984 Mori-Seiki SL-8F Fanuc 11T |
| Okuma | LC-30 1C | 1982 | 7998 | LATHES, CNC, 2-AXIS, CHUCKER | OSP-3000L | Good | Yes | 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. Turret, Autoblok KNCS-NB 315-91 Quick Change Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Miscellaneous Spare Parts, RS-232 Port | Yes | 1982 Okuma LC-30 1C OSP-3000L |
| Okuma and Howa | HL-20 | 1996 | 9056 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 18T | Good | No | | Yes | 1996 Okuma and Howa HL-20 Fanuc 18T |
| Amera-Seiki | LT-50 / 120" | 2009 | 7702 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 0iTC | New | Yes | | Yes | 2009 Amera-Seiki LT-50 / 120" Fanuc 0iTC |
| Birmingham | Top-Turn 406 | 2002 | 8705 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fagor 8025 | Very Good | Yes | 16" Swing, 34" Centers, 3,000 RPM, 7.5 HP, 4 Turret, Tailstock, 8" 3-Jaw Chuck, 10" 4-Jaw Chuck, 15” Face Plate, Two (2) Ball Bearing Steady Rests, Two (2) Speed Manual Tailstock, Bison Manual 5C Collets Chuck, Threading | Yes | 2002 Birmingham Top-Turn 406 Fagor 8025 |
| Clausing | K Series 2000 | 2001 | 8555 | LATHES, CNC, 2-AXIS, UNIVERSAL | | Very Good | Yes | 15.7" Swing, 9.65" SOC, 23" Swing in Gap, 50" Centers, 2,500 RPM, 2.16" Spindle Bore, 15 HP, 8 Station Turret, 8" 3-Jaw Hydraulic Chuck, RS-232 Port, Spindle Speed and Load Meter, Hydraulic Tailstock With Programmable Quill, Turret Tooling, Coolant System | Yes | 2001 Clausing K Series 2000 |
| Daewoo | Puma-10 HC | 1996 | 9291 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OT | Very Good | yes | Swing Over Bed 19.7", Swing Over Saddle 13", Maximum Turning Diameter 14.6", Length 20.7", 3,500 RPM, 30 HP, 10 Sta. Turret, Programmable Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, RS-232 Port, Miscellaneous Tool Holders | on way | 1996 Daewoo Puma-10 HC Fanuc OT |
| Daewoo | Puma-6H S | 1987 | 7999 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 10T | Good | Yes | | Yes | 1987 Daewoo Puma-6H S Fanuc 10T |
| Daewoo | Puma-8 S | 1995 | 8773 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OTC | Good | Yes | 19.7" Swing, 12.2" SOC, 18" Centers, 5,000 RPM,2" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chuck, Programmable Tailstock, Chip Conveyor, Tool Eye, RS-232 Port | Yes | 1995 Daewoo Puma-8 S Fanuc OTC |
| Haas | SL-10T | 2007 | 9292 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Very Good | Yes | Swing Over Bed 16.25", Swing Over Saddle 8", Maximum Turning Diameter 11", Length 14", 6,000 RPM, 15 HP, 12 Sta. Turret, Programmable Tailstock, Collect Chuck, Tool Holders, Programmable Tailstock, Tool Presetter, 1,300 Power On, 1,200 Cycl Start and 700 Feed Cutting Hours | Yes | 2007 Haas SL-10T Haas 32 BIT |
| Haas | SL-20T | 2006 | 8961 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Excellent | Yes | 0" Swing, 20" Centers, 4,000 RPM, 20 HP, 10 Sta. Turret, 8" 3-Jaw, ProgrammableTailstock, Chip Auger, Floppy, 1 Meg of Memory, Visual Quick Code Programming, Tool Presetter, Spindle Orientation, Auto Parts Catcher, High Intensity Lighting, Rigid Tapping, Machine From a Tech School | Yes | 2006 Haas SL-20T Haas 32 BIT |
| Haas | SL-40T | 2008 | 9235 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Excellent | Yes | 40" Swing, 25.5" Turn Dia., 51" Centers, 2,400 RPM, 55 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Tool Presetter, 3.5" Floppy Drive, Chip Conveyor, Programmable Hydraulic Tailstock, 12 HP Optional Upgraded Z-Axis Motor, 1 MB Memory, High Intensity Lighting, Extended Tool Pocket Option, Allows Up To 33" Boring Bar, Two Speed Gearbox, Parts Boom & Hoist | Yes | 2008 Haas SL-40T Haas 32 BIT |
| Haas | SL-40TL BB | 2007 | 8303 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Excellent | Yes | 40" Swing, 25.5" Turn Dia., 51" Centers, 1,400 RPM, 55 HP, 10 Sta. Turret, 18" 3-Jaw Air Chuck With 7.1" Hole, Tool Presetter, Programmable Hydraulic Tailstock, Big Bore Option, High Pressure Coolant (300 psi), Two Speed Geared Head, Steady Rest Provision With Schunk HTL-4 Steady Rest, Turbo Chip Conveyor, High Intensity Lighting, VOA Value Option Package-A, Long Bed Option | Yes | 2007 Haas SL-40TL BB Haas 32 BIT |
| Haas | TL-1 | 2006 | 9414 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Very Good | Yes | 16" Swing, 9.5" SOC, 30" Centers, 2,000 RPM, 7.5 HP, 10 Station Turret, 8" 3-Jaw Chuck, USB Port, Coolant System | Yes | 2006 Haas TL-1 Haas 32 BIT |
| Hitachi-Seiki | Hitec-Turn 20 | 1986 | 8043 | LATHES, CNC, 2-AXIS, UNIVERSAL | Seicos Multi | Good | Yes | 17.7" Swing, 11.2" OCS, 16" Centers, 3,600 RPM, 15 HP, 10 Station Turret, 8" 3-Jaw Hydraulic Chuck, Hydraulic Tailstock With Programmable Quill, Color CRT, RS-232 Port, Turret Tooling, Coolant System, Chip Conveyor, Conversational Control | Yes | 1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi |
| Hurco | TM-6 | 2006 | 9220 | LATHES, CNC, 2-AXIS, UNIVERSAL | Ultramax Max 32 | Very Good | Yes | 18.2" Swing, 9.4" SOC, 13.4" Centers, 6,000 RPM, 17.5 HP, 12 Station Turret, 6" 3-Jaw Chuck, Constant Surface Speed, Auto Tool Pre Setter, 16C Collet Chuck, Under 1,000 Spindle Hours On Machine | Yes | 2006 Hurco TM-6 Ultramax Max 32 |
| Lodge and Shipley | 1225U | 1982 | 9229 | LATHES, CNC, 2-AXIS, UNIVERSAL | GE 1050 | Good | Yes | 25" Swing, 12" SOC, 15.2 Turn Dia., 78" Centers, 2,500 RPM, 40 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret | No | 1982 Lodge and Shipley 1225U GE 1050 |
| Lodge and Shipley | 1540U | 1982 | 9228 | LATHES, CNC, 2-AXIS, UNIVERSAL | GE 1050 | Good | Yes | 30" Swing, 16" SOC, 17.3 Turn Dia., 78" Centers, 2,000 RPM, 50 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret | Yes | 1982 Lodge and Shipley 1540U GE 1050 |
| Mazak | M-4 / 1000 | 1979 | 6049 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6TB | Good | Yes | 30" Swg., 60" Centers, 21.7" x 62" Travels, 2,200 RPM, 25 HP, 4 & 6 Position Turrets, 10"-3 Jaw Chuck, Chip Conveyor | Yes | 1979 Mazak M-4 / 1000 Fanuc 6TB |
| Mazak | M-4 / 1500 | 1980 | 6050 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6TB | Good | Yes | | Yes | 1980 Mazak M-4 / 1500 Fanuc 6TB |
| Mazak | Quick Turn Nexus-250 | 2008 | 9037 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Matrix | Excellent | Yes | | Yes | 2008 Mazak Quick Turn Nexus-250 Mazatrol Matrix |
| Mazak | Quick Turn Nexus-300 | 2004 | 8879 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Fusion 640 T | Very Good | Yes | | Yes | 2004 Mazak Quick Turn Nexus-300 Mazatrol Fusion 640 T |
| Mazak | Quick Turn-10N | 1998 | 8823 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol T-PLUS | Very Good | Yes | 11.81" Swing, 6.85" SOC, 6.29" Turn Dia., 11.22" Turn Length, 6,000 RPM, 1.55 Bar Cap., 10 HP, 8 Sta. Turret, Pneumatic Tailstock, Turret Tooling, Auto Tool Touch Setting Probe, 6" 3-Jaw Kitagawa Chuck With Pneumatic Drawbar | Yes | 1998 Mazak Quick Turn-10N Mazatrol T-PLUS |
| Mazak | Quick Turn-200 | 2003 | 9257 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Fusion 640 T | Very Good | Yes | 18.5" Swg, 12.4" Centers, 4,000 RPM, 15 HP, 12 Sta., Tailstock, 8" 3-Jaw Chuck, Manual Tool Eye, GL-30 Gantry Load / Unload System, Six (6) Position Rotary Stacker | Yes | 2003 Mazak Quick Turn-200 Mazatrol Fusion 640 T |
| Mazak | Quick Turn-250 | 2000 | 8254 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Fusion 640 T | Very Good | Yes | 23.65 Swing, 10.5" SOC, 15.70 Turn Dia., 19.68" Turn Length, 5,000 RPM, 2.75 Bore, 20 HP, 12 Station Turret, 8" 3-Jaw Hydraulic Chuck, Tailstock, Automatic Tool Eye | Yes | 2000 Mazak Quick Turn-250 Mazatrol Fusion 640 T |
| Mori-Seiki | SL-3H | 1986 | 9381 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6T | Need Repair | No | | Yes | 1986 Mori-Seiki SL-3H Fanuc 6T |
| Mori-Seiki | SL-7B | 1981 | 7979 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6TB | Good | Yes | 35.8" Swing, 22.8" SOC, 65" Centers, 1,010 RPM, 12 Sta. Turret, 40 HP, 21 1/2" 3-Jaw Hydraulic Chuck, Programmable Hydraulic Tailstock, Flood Coolant System, Chip Conveyor, New 50 HP AC Digital Spindle Drive and Motor | Yes | 1981 Mori-Seiki SL-7B Fanuc 6TB |
| Okuma | Cadet L-1420 / 650 | 199? | 8623 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-700L | | | | Yes | 199? Okuma Cadet L-1420 / 650 OSP-700L |
| Okuma | Crown L-106 SB | 2001 | 8340 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-U100L | Very Good | Yes | | Yes | 2001 Okuma Crown L-106 SB OSP-U100L |
| Okuma | Crown L-1420 / 650 BB | 2000 | 7362 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-U10L | Good | Yes | 24.41 Swing, 18.90" S.O.C. , 14.17" Turning Dia., 27" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta. Turret, 15" 3-Jaw Kitagawa Hydraulic Chuck, Tow Along Tailstock, IGF, Lap 4, Auto Chamfering, MAC Man, Nose Radius 2B | Yes | 2000 Okuma Crown L-1420 / 650 BB OSP-U10L |
| Okuma | LB-15 | 199?? | 8485 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020L | Fair | Yes | | Yes | 199?? Okuma LB-15 OSP-5020L |
| Okuma | LB-15 | 1990 | 8922 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5000L | Fair | No | | Yes | 1990 Okuma LB-15 OSP-5000L |
| Okuma | LB-15 | 1992 | 8921 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020L | Fair | No | | Yes | 1992 Okuma LB-15 OSP-5020L |
| Okuma | LB-25 | 1993 | 8260 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020LG | Fair | Yes | | Yes | 1993 Okuma LB-25 OSP-5020LG |
| Okuma | LC-30 1SC / 1000 | 1989 | 8261 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5000LG | Fair | Yes | | Yes | 1989 Okuma LC-30 1SC / 1000 OSP-5000LG |
| Okuma | LC-30 1SC / 1000 | 1987 | 8974 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5000L | Good | Yes | 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. VDI Turret, 12" 3-Jaw Kitagawa Chuck, RS-232 Port, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Machine Rebuilt About Four (4) Years Ago - New Control, New Ball Screws, New Hydraulic Kit In Tailstock, Wipers, Installed New VDI Turret | Yes | 1987 Okuma LC-30 1SC / 1000 OSP-5000L |
| Okuma and Howa | ACT-20 | 1993 | 8325 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 18T | Very Good | Yes | 20" Swing, 13.3" SOC, 11.81" Turning Dia., 18" Turning Length, 4,500 RPM, 2" Bar Cap. 20 HP, 12 Station Turret, Tailstock, 8" 3-Jaw Hydraulic Chuck, Chip Conveyor, Parts Catcher, Barfeed Interface | Yes | 1993 Okuma and Howa ACT-20 Fanuc 18T |
| Okuma and Howa | ACT-35L | 1996 | 8324 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 18T | Very Good | Yes | 19.68"Swing, 17.25"SOC, 13.77" Turning Dia., 48.6 Turning Length, 3,500 RPM, 3.125" Bar Cap. 25 HP, 12 Station Turret, Programmable Tailstock Body & Quill, 12" 3-Jaw Hydraulic Chuck, Chip Conveyor, New X-Axis Ball Screw | Yes | 1996 Okuma and Howa ACT-35L Fanuc 18T |
| Wasino | LJ-5N | 2000 | 8693 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 21iT | Very Good | Yes | 16.5" Swing, 22" Centers, 4,000 RPM, 15 HP, 10 Sta. Turret, 8" 3-Jaw Chuck, Intergrated Robot Load / Unload Gantry System, Tool Setter, Parts Stacker | Yes | 2000 Wasino LJ-5N Fanuc 21iT |
| Mazak | Super Quick Turn-200S | 1998 | 7135 | LATHES, CNC, 2-AXIS, W- SUB-SPINDLE | Mazatrol T-PLUS | Good | Yes | | Yes | 1998 Mazak Super Quick Turn-200S Mazatrol T-PLUS |
| Hardinge | Conquest T-51 | 1996 | 8588 | LATHES, CNC, 3-AXIS, CHUCKER W-MILLING | Fanuc 18TB | Good | Yes | 31" Swing, 26" OCS, 24" Max Mach., 4,500 RPM, 20 HP, 12 / 6 Sta. Turrets, 2" Bar Cap., C-Axis Milling, 12' Bar Feed, Chip Conveyor | Yes | 1996 Hardinge Conquest T-51 Fanuc 18TB |
| Amera-Seiki | T-310 MC | 2008 | 8239 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Fanuc 0iTC | Like New | Yes | | Yes | 2008 Amera-Seiki T-310 MC Fanuc 0iTC |
| Mazak | Integrex 30 / 1000 | 1995 | 6234 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Mazatrol T-PLUS | Good | Yes | Swing 20", Swing Over Cross Slide 15.75", Maximum Turning Diameter 20", Length 40", 3,500 RPM, 35 HP, 20 Sta. ATC, 40 Taper, 10" 3-Jaw Chuck, Chip Conveyor, Coolant Through Milling Head, User Macros, Fully Programmable Tailstock Body and Quill, Automatic Tool Eye, EIA / ISO Input Function | Yes | 1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS |
| Daewoo | Puma-240 MSC | 2003 | 8506 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iT | Very Good | Yes | 21.65" Swing, 15.4" SOC, 11.4" Turn Dia., 32.3" Turn Length, 3,500 RPM, 2.56 Bar Cap., 25 HP, 6,000 RPM, S-26 Collet Chuck On Main, 3J Collect Chuck On Sub, Parts Catcher, Parts Conveyor, Ballscrew Driven Programmable Sub Spindle, Milling Spindle Synchronous Tapping, Chip Conveyor, LNS Bar Feed, Programmable Tool Setter, Load Monitoring, High Pressure Coolant (1,000 psi), Coolant Through Sub Spindle, All Control Option Turned On | Yes | 2003 Daewoo Puma-240 MSC Fanuc 18iT |
| Doosan | S310 SMLY | 2003 | 8789 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | | Yes | 2003 Doosan S310 SMLY Fanuc 18iTB |
| Okuma | Captain L-370 M BB | 2004 | 9176 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | OSP-E100L | Very Good | Yes | Swing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Renishaw Gauging, Fully Programmable Tailstock, Auto Door, Robot Interface, Tool Presetter, Live and Standard Tooling, Chip Conveyor, 200 PSI Coolant Pump, One Touch IGF, Parts Catcher, Bar Feed Interface | Yes | 2004 Okuma Captain L-370 M BB OSP-E100L |
| Amera-Seiki | TS-42 | 2006 | 8634 | LATHES, CNC, 4-AXIS, CHUCKER | Mitsubishi 64SM | Demo | Yes | | Yes | 2006 Amera-Seiki TS-42 Mitsubishi 64SM |
| Kitako | MT4-200 | 1995 | 8810 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector | Yes | 1995 Kitako MT4-200 Fanuc 18T |
| Kitako | MT4-200 | 1996 | 8809 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector | Yes | 1996 Kitako MT4-200 Fanuc 18T |
| Mori-Seiki | RL-203 | 2003 | 9254 | LATHES, CNC, 4-AXIS, CHUCKER | Mitsubishi MSG-803 | Very Good | Yes | 11.8" Swing, 9.44" Turning Dia., 5.9" Turning Length, 4,500 RPM, 15 HP, 2-8 Station Turrets, Two 8" 3-Jaw Hydraulic Chucks, Chip Conveyor, Coolant Through Spindle, Spindle Orientation, Fourteen (14) Station Stocker, LG-05 Gantry Load / Unload System | Yes | 2003 Mori-Seiki RL-203 Mitsubishi MSG-803 |
| Okuma | LCC-15 2SC | 1999 | 7136 | LATHES, CNC, 4-AXIS, CHUCKER | OSP-7000L | Good | Yes | | Yes | 1999 Okuma LCC-15 2SC OSP-7000L |
| Okuma | LFS-15-2SP | 1999 | 7137 | LATHES, CNC, 4-AXIS, CHUCKER | OSP-U100L | Good | Yes | Twin Spindle Chucker, Swing Over Bed 20", Over Saddle 19.68", 4,500 RPM, 15 HP, 12 Sta. Turrets, 8" 3-Jaw Chucks Both Spindles, Two (2) Chip Conveyors, 10 Station & 20 Station Circular Stocker, Coolant Through Spindle, Chuck Air Blast | Yes | 1999 Okuma LFS-15-2SP OSP-U100L |
| Warner and Swasey | 2-SC-15 | 1978 | 9029 | LATHES, CNC, 4-AXIS, CHUCKER | Allen Bradley 7360 | Good | No | 17 3/8" Swing, 1,178 RPM, 4.5" Spindle Bore, 50 HP, Twin Turret, 15" 3-Jaw Hydraulic Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals, Behind the Tape Reader | No | 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 |
| Okuma | LU-15 2SC | 2000 | 8255 | LATHES, CNC, 4-AXIS, UNIVERSAL | OSP-U100L | Very Good | Yes | Swing 22", Swing Over Cross Slide 17.7", Maximum Turning Diameter 14.17", Length 23.62", 4,500 RPM, 30 HP, 12 / 8 Sta. Turrets, 8" 3-Jaw Hydraulic Chuck, Position Lower Simultaneous Tool Turrets (20 Total Tools), Lap-4, Animation, Cycle Time Calculator, User Task 2, Barfeeder Interface, 3.5" Floppy Disk Drive, NC Torque Limit, Chip Conveyor, Programmable Tailstock | Yes | 2000 Okuma LU-15 2SC OSP-U100L |
| Okuma | LU-25 2SC | 1997 | 8256 | LATHES, CNC, 4-AXIS, UNIVERSAL | OSP-7000L | Very Good | Yes | Swing 22", Swing Over Cross Slide 16.54", Maximum Turning Diameter 16.80", Length 25.59", 3,500 RPM, 40 HP, 12 / 10 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck, Position Lower Simultaneous Tool Turrets (20 Total Tools), Lap-4, Animation, Cycle Time Calculator, User Task 2, Barfeeder Interface, 3.5" Floppy Disk Drive, NC Torque Limit, Chip Conveyor, Programmable Tailstock | On Way | 1997 Okuma LU-25 2SC OSP-7000L |
| Amera-Seiki | TS-52 MC | 2006 | 8633 | LATHES, CNC, 4-AXIS, W-MILLING | Mitsubishi 64S | Demo | Yes | | Yes | 2006 Amera-Seiki TS-52 MC Mitsubishi 64S |
| Doosan | Z340SM | 2002 | 8266 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Like New | Yes | | Yes | 2002 Doosan Z340SM Fanuc 18iTB |
| Mori-Seiki | ZL-200 SMC | 2001 | 8068 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Mitsubishi MSC-501 (18iTA) | Very Good | Yes | 26.8" Swing, 20.1" SOC, 16.7" Turning Length, 4,000 RPM, 20 HP, Sub-Spindle, Two Turrets, Live Tooling, Full C-Axis for Main and Sub-Spindle, Overhead in Machine Auto Parts Catcher, Chip Conveyor | On Way | 2001 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501 (18iTA) |
| Amera-Seiki | GT-32 | 1996 | 8436 | LATHES, CNC, GANG STYLE | Fanuc OTC | Good | Yes | 14.3" Swing, 10.8" OCS, 4" Turning Dia., 11.8" Turn Length, 1.57" Spindle Bore, 10 HP, 12" x 20.8" Gang Slide, 16C Collet Closure | Yes | 1996 Amera-Seiki GT-32 Fanuc OTC |
| Daewoo | Puma-160 GT | 2002 | 8822 | LATHES, CNC, GANG STYLE | Fanuc I Series | Very Good | Yes | 15.75" Swing, 4 Swing Over Top Plate, 6,000 RPM, 1.5 Bar Cap., 3.7 HP, 8 Sta. Slide, 16C Collet Chuck, Parts Catcher, Wired For Renishaw Touch Probe (probe not included) | Yes | 2002 Daewoo Puma-160 GT Fanuc I Series |
| Hardinge | Conquest GT-27 SP | 2007 | 9216 | LATHES, CNC, GANG STYLE | Fanuc 21iT | | | | | 2007 Hardinge Conquest GT-27 SP Fanuc 21iT |
| Hardinge | Conquest GT-27 SP | 1995 | 8589 | LATHES, CNC, GANG STYLE | Fanuc 18T | Good | Yes | 11.76" Swing, 1 1/16" Spindle Bore, 6,000 RPM, 5 HP, Live Tooling, 12' Bar Feed, Parts Removal System | Yes | 1995 Hardinge Conquest GT-27 SP Fanuc 18T |
| Kia | Kit 30A | 1995 | 9360 | LATHES, CNC, GANG STYLE | Yasnac LX-3 | Very Good | Yes | | On Way | 1995 Kia Kit 30A Yasnac LX-3 |
| Mazak | Quick Turn-6G | 1997 | 7297 | LATHES, CNC, GANG STYLE | | Good | Yes | | Yes | 1997 Mazak Quick Turn-6G |
| Wasino | G-6 | 1999 | 8694 | LATHES, CNC, GANG STYLE | Fanuc 21iT | Good | Yes | 15.75" Swing, 6,000 RPM, 5.5 HP, 8 Sta. Slide, Tailstock, 5C Collet Chuck, Intergrated Robot Load / Unload Gantry System, Tool Setter, Parts Stacker | Yes | 1999 Wasino G-6 Fanuc 21iT |
| Mazak | Multiplex 6200 | 2004 | 9253 | LATHES, CNC, OPPOSING SPINDLES W-MILLING | Mazatrol Fusion 640 T | Very Good | Yes | | Yes | 2004 Mazak Multiplex 6200 Mazatrol Fusion 640 T |
| Mori-Seiki | DL-151 MCY | 1999 | 7877 | LATHES, CNC, OPPOSING SPINDLES W-MILLING | Fanuc 18TA | Good | Yes | 16.5" Swing, 7.8" SOC, 5,000 RPM, 2.2" Bore, 15 HP, 2-12 Sta. Turret, Two (2) 6" 3-Jaw Chucks and Two (2) 3J Collet Chucks, Chip Conveyor, Bar Feed Interface, Parts Conveyor, Two (2) Tool Pre-Setters, Auto Parts Catcher With Ejector, Full C-Axis, Y-Axis, Live Tooling | Yes | 1999 Mori-Seiki DL-151 MCY Fanuc 18TA |
| Kingston | HL-2500 | 1978 | 9047 | LATHES, ENGINE | | Good | Yes | | Yes | 1978 Kingston HL-2500 |
| Kingston | HL-2500 | 1981 | 9048 | LATHES, ENGINE | | Very Good | Yes | | Yes | 1981 Kingston HL-2500 |
| Kingston | HLC-1860 | 1978 | 7996 | LATHES, ENGINE | | Very Good | Yes | | Yes | 1978 Kingston HLC-1860 |
| Leblond | Regal Servo-Shift | 1956 | 7182 | LATHES, ENGINE | | Good | Yes | Swing Over Bed 18", Swing Over Saddle 11 1/4", Maximum Turning Length 78", 1,000 RPM, 10 HP, Tailstock, 15" 4-Jaw Chuck, Inch / Metric Threading, Taper Attachment, Servo Shift Controls, Extra 4-Jaw Chuck | Yes | 1956 Leblond Regal Servo-Shift |
| Meuser | M-IV-5 | 1968 | 8838 | LATHES, ENGINE | | Very Good | Yes | 36.5" Swing, 26.5" SOC, 360" Centers, 15 HP, Inch Metric Threading, Four (4) Way Tool Post, Three (3) Steady Rests | Yes | 1968 Meuser M-IV-5 |
| Hardinge | ASM-5C | 1977 | 8217 | LATHES, SECOND OPERATION | | Good | Yes | | Yes | 1977 Hardinge ASM-5C |
| Warner and Swasey | 3A M-1200 | 1954 | 8169 | LATHES, TURRET - RAM TYPE | | Good | Yes | 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, 8" 3-Jaw Chuck, Coolant Pan and Pump, Single Tool Post | Yes | 1954 Warner and Swasey 3A M-1200 |
| Warner and Swasey | 3A M-1200 Lot 288 | 1942/2000 | 7925 | LATHES, TURRET - RAM TYPE | | Good | Yes | 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, Collet Chuck, Coolant Pan and Pump, Haase Quick Change Tool Post, Rebuilt Seven (7) Years Ago | Yes | 1942/2000 Warner and Swasey 3A M-1200 Lot 288 |
| Gisholt | 1L | | 8168 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | Yes | Gisholt 1L |
| Gisholt | 1L | | 8167 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | Yes | Gisholt 1L |
| Warner and Swasey | 4A M-3550 | | 8500 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | Yes | Warner and Swasey 4A M-3550 |
| Amera-Seiki | VB-2 | 2007 | 7825 | MACHINING CENTERS, GANTRY TYPE, NC-CNC | Fanuc 21iMB | Like New | Yes | | Yes | 2007 Amera-Seiki VB-2 Fanuc 21iMB |
| Amera-Seiki | VB-2 | 2009 | 8380 | MACHINING CENTERS, GANTRY TYPE, NC-CNC | Fanuc 21iMB | New | Yes | | Yes | 2009 Amera-Seiki VB-2 Fanuc 21iMB |
| Amera-Seiki | VB-3 | 2009 | 9013 | MACHINING CENTERS, GANTRY TYPE, NC-CNC | Fanuc 21iMB | NEW | Yes | | Yes | 2009 Amera-Seiki VB-3 Fanuc 21iMB |
| Haas | GR-510 | 2004 | 7949 | MACHINING CENTERS, GANTRY TYPE, NC-CNC | Haas 32 BIT | Very Good | Yes | 122" x 53" Table, 121" x 61" x 11" Travels, 10,000 RPM, 40 Taper, 15 HP, 20 ATC, Remote Jog Handle, Midi Laser for Tool Calibration, Mida Probe for Piece Locating, Rigid Tapping, Two (2) Coolant Tanks, Two (2) Coolant Filtration System | Yes | 2004 Haas GR-510 Haas 32 BIT |
| Amera-Seiki | A-50H | 2008 | 7347 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18iMB | Like New | Yes | | Yes | 2008 Amera-Seiki A-50H Fanuc 18iMB |
| Cell-Con | H-15S | 2005 | 9130 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 21M | Good | Yes | 24" x 25" Table, 360,000° Indexing, 24" x 25" x 18" Travels, 15 HP, 6,000 RPM, 45 Taper, 6 ATC, RS-232 Port, Canned Cycles, Rigid Tapping, Scaling, Macro "B", Remote Jog Handle, Polar Coordinates, Helical interpolation, Coolant Through Spindle, Completely Rebuilt By Cell-Con In 2005 | Yes | 2005 Cell-Con H-15S Fanuc 21M |
| Cincinnati | Maxim-500 | 1995 | 9059 | MACHINING CENTERS, HORIZONTAL CNC | Acramatic 950 | Good | Yes | | On Way | 1995 Cincinnati Maxim-500 Acramatic 950 |
| Cincinnati | Maxim-500 | 1992 | 9102 | MACHINING CENTERS, HORIZONTAL CNC | Acramatic 950 | Very Good | No | Two (2) 19.7" x 19.7" Pallets, 360,000° Indexing, 29.5" x 29.5" x 29.5" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 40 ATC, Chip Conveyor, Coolant Through Spindle, Color Graphics, Full Tool Library, High Speed DNC, RS-232 Port, Floppy Drive, Pallet Wash Down, Pallet Wash Down, Renishaw Receiver, Thousands of Dollars In Spare Parts, Two (2) Extra Pallets | Yes | 1992 Cincinnati Maxim-500 Acramatic 950 |
| Daewoo | Ace H100 | 1994 | 7982 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Good | Yes | | Yes | 1994 Daewoo Ace H100 Fanuc 15M |
| Daewoo | DHP-630 | 2001 | 9320 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16iMB | Very Good | Yes | | On Way | 2001 Daewoo DHP-630 Fanuc 16iMB |
| Haas | EC-1600 | 2005 | 9416 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Good | Yes | | Yes | 2005 Haas EC-1600 Haas 32 BIT |
| Haas | HS-1RP | 2001 | 8962 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Good | Yes | | Yes | 2001 Haas HS-1RP Haas 32 BIT |
| Haas | HS-1RP | 1999 | 9129 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Very Good | Yes | | Yes | 1999 Haas HS-1RP Haas 32 BIT |
| Haas | HS-1RP | 2000 | 7869 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Very Good | Yes | 16" x 16" Pallets, 24" x 20" x 22", 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping, Coolant Through Spindle (300 PSI), Remote Jog Handle, 1 Meg Memory, Two (2) Kurt Vise Towers (8 positions each), Custom Macros, 3.5" Floppy Drive | Yes | 2000 Haas HS-1RP Haas 32 BIT |
| Hitachi-Seiki | HG-800 | 1995 | 8520 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15MB | Fair | Yes | 31.5" X 31.5" Pallets, 44" x 37" x 33" Travels, 6,000 RPM, 50 Taper, 30 HP, 60 ATC, 1 Deg., Manual Pulse Generator, Chip Conveyor, Rigid Tapping, Flood Coolant System, Spindle Chiller, Coolant Through Spindle, 320M Memory, 200 Tool Offsets | Yes | 1995 Hitachi-Seiki HG-800 Fanuc 15MB |
| Hitachi-Seiki | HS-630 | 1998 | 7490 | MACHINING CENTERS, HORIZONTAL CNC | Seicos Sigma 16M | Very Good | Yes | Two 24.8" Pallets, 360,000° Indexing, 2,640 Lbs Table Load, 33.5" x 31.5" x 33.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle | Yes | 1998 Hitachi-Seiki HS-630 Seicos Sigma 16M |
| Kearney and Trecker | MM-200 | 1985 | 6772 | MACHINING CENTERS, HORIZONTAL CNC | GeminiI D | Very Good | Yes | 18" x 18" Pallets - Six, 360,000° Indexing, 24" x 20" x 20" Travels, 4,000 RPM, Straight Shank, 20 HP, 120 ATC, Six (6) Extra Pallets, Coolant System | Yes | 1985 Kearney and Trecker MM-200 GeminiI D |
| Kia | KH-50G | 2005 | 8094 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18iMB | Very Good | Yes | 19.7" x 19.7" Pallets, Full 4th, 29.9" x 27.8" x 25.6" Travels, 8,000 RPM, 50 Taper, 18.5 HP, 60 ATC, Rigid Tapping, High Pressure Coolant Through Spindle, Chip Conveyor, Remote Jog Handle, Some Tool Holders, Machine Installed in 2007 | Yes | 2005 Kia KH-50G Fanuc 18iMB |
| Kitamura | HX-300 | 1999 | 7492 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Very Good | Yes | 12" x 12" Pallets, Full 4th, 20.1" x 20.1" x 15.7" Travels, 10,000 RPM, 20 HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets, Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic | Yes | 1999 Kitamura HX-300 Fanuc 15M |
| Kiwa | KNH-400 | 2001 | 8326 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18iMA | Very Good | Yes | 15.75" x 15.75" Pallets, 23.62" x 23.62" x 19.68" Travels, 10,000 RPM, 40 Taper, 25 HP, 64 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Remote Manual Pulse Generator, Chip Conveyor, Rigid Tapping | Yes | 2001 Kiwa KNH-400 Fanuc 18iMA |
| Makino | A-55 | 2000 | 9202 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc Pro 3 | Very Good | Yes | 15.74" x 15.74" Pallets, 360,000° Indexing, 22.05" x 22.05" x 23.6" Travels, 30 HP, 14,000 RPM, 40 Taper, 40 ATC, Coolant Through Spindle, Oil Chiller, Air Dryer, Helical Interpolation, CCH (Continuous Hydraulic Supply Clamp/Unclamp - $24,000 Option), B2 Pallet System Shared Between Machines, Six (6) Extra Pallets, Approximately Two Hundred Fifty (25) Tool Holders | On Way | 2000 Makino A-55 Fanuc Pro 3 |
| Makino | MCB-1210 | 1999 | 9362 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16M Pro3 | Good | Yes | | Yes | 1999 Makino MCB-1210 Fanuc 16M Pro3 |
| Mazak | FH-5800 | 2000 | 9124 | MACHINING CENTERS, HORIZONTAL CNC | Mazatrol Fusion 640 M | Good | Yes | Twenty Four (24) 19.68" x 19.68" Pallets, 360,000° Indexing, 27.95" x 24.01" x 25.98" Travels, 30 HP, 12,000 RPM, 40 Taper, 120 ATC, PCMCIA Interface (2 Slots), EIA / ISO Input Function, Adaptive Feedrate Control, Rigid Tapping, EIA 3D Compensation, Tool Life Monitoring, Tool Breakage Detection, Shape Compensation, Scaling, Flood & Niagara Coolant System, Palletech Equipped, Coolant Through Spindle (1,000 psi), EIA Helical Tap Cycle, Mazatrol Helical, Mazatrol Planet Tap, Mazatrol CO-OR Shift, Auto TLM | Yes | 2000 Mazak FH-5800 Mazatrol Fusion 640 M |
| Mazak | H-580 | 1997 | 6947 | MACHINING CENTERS, HORIZONTAL CNC | Mazatrol M-32B | Good | Yes | | Yes | 1997 Mazak H-580 Mazatrol M-32B |
| Mazak | H-580 | 1997 | 8514 | MACHINING CENTERS, HORIZONTAL CNC | Mazatrol M-Plus | Good | Yes | 19.68" x 19.68" Pallets, 27.95" x 24.01" x 25.98" Travels, 10,000 RPM, 40 Taper, 30 HP, 90 ATC, Full 4th, Coolant Through Spindle), Manual Pulse Generator, Chip Conveyor, Rigid Tapping, Palletech Prep, EIA / ISO Input Function, Monitoring System B (part probe), Multi-Tap Transformer, 1,000 Meters of Additional Memory | Yes | 1997 Mazak H-580 Mazatrol M-Plus |
| Mitsui-Seiki | HR-7A | 1984 | 8982 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 6MB | Good | Yes | | Yes | 1984 Mitsui-Seiki HR-7A Fanuc 6MB |
| Mitsui-Seiki | JIDIC-H6C | 1993 | 7975 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Very Good | Yes | | Yes | 1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M |
| Mori-Seiki | MH-50 | 1987 | 8956 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18M | Needs Repair | Yes | | Yes | 1987 Mori-Seiki MH-50 Fanuc 18M |
| Mori-Seiki | NH-6300 DCG | 2007 | 9375 | MACHINING CENTERS, HORIZONTAL CNC | Mori-Seiki MSX-701M | Very Good | Yes | | Yes | 2007 Mori-Seiki NH-6300 DCG Mori-Seiki MSX-701M |
| Mori-Seiki | SH-63 | 1996 | 9049 | MACHINING CENTERS, HORIZONTAL CNC | Mitsubishi MSC-518M | Good | Yes | | Yes | 1996 Mori-Seiki SH-63 Mitsubishi MSC-518M |
| Niigata | SPN-50 | 1995 | 8959 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16M | Very Good | Yes | | Yes | 1995 Niigata SPN-50 Fanuc 16M |
| Okamoto | HMC-3000 | 1982 | 9119 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 6MB | Needs Repair | Yes | | Yes | 1982 Okamoto HMC-3000 Fanuc 6MB |
| Okuma and Howa | Millac 550H | 2001 | 8323 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16iM | Very Good | Yes | 19.68" x 19.68" Pallets, 31.5" x 31.5" x 27.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Hydraulics Plumbed To Each Pallet For Work Holding Fixtures, Chip Conveyor, 5,500 Cutting Hours, Cutting Only Aluminum | Yes | 2001 Okuma and Howa Millac 550H Fanuc 16iM |
| Toyoda | FA-450 II | 1998 | 9128 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Very Good | Yes | | Yes | 1998 Toyoda FA-450 II Fanuc 15M |
| Amera-Seiki | A-1 | 2006 | 7345 | MACHINING CENTERS, VERTICAL, CNC | Mitsubishi 64SM | Like New | Yes | | Yes | 2006 Amera-Seiki A-1 Mitsubishi 64SM |
| Amera-Seiki | A-1 | 2007 | 7950 | MACHINING CENTERS, VERTICAL, CNC | Mitsubishi 64SM | Like New | Yes | | Yes | 2007 Amera-Seiki A-1 Mitsubishi 64SM |
| Amera-Seiki | A-2 | 2008 | 7471 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OiMC | Demo Machine | Yes | | Yes | 2008 Amera-Seiki A-2 Fanuc OiMC |
| Amera-Seiki | A-3 | 2005 | 6405 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OiMB | Like New | Yes | | Yes | 2005 Amera-Seiki A-3 Fanuc OiMB |
| Amera-Seiki | A-5 | 2008 | 7990 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OiMC | New | Yes | | Yes | 2008 Amera-Seiki A-5 Fanuc OiMC |
| Amera-Seiki | VX5-3 | 2009 | 8629 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 31iMA | New | No | | Yes | 2009 Amera-Seiki VX5-3 Fanuc 31iMA |
| Bostomatic | 505 | 1996 | 8109 | MACHINING CENTERS, VERTICAL, CNC | Bostomatic BDC-3200X | Good | Yes | | Yes | 1996 Bostomatic 505 Bostomatic BDC-3200X |
| Bostomatic | BD-40 | 1994 | 9065 | MACHINING CENTERS, VERTICAL, CNC | Bostomatic BDC-3200X | Need Repair | Yes | | Yes | 1994 Bostomatic BD-40 Bostomatic BDC-3200X |
| Bridgeport | VMC-1000 P3 | 2003 | 9402 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OiMD | Very Good | Yes | | Yes | 2003 Bridgeport VMC-1000 P3 Fanuc OiMD |
| Butler Elgamill | HE 28363 | 1990 | 8044 | MACHINING CENTERS, VERTICAL, CNC | Heidenhain 355 | Good | Yes | 315" x 32" Table, 244" x 65" x 38" Travels, A-Axis Travel 130,000°, B-Axis Travel 360,000°, 3,000 RPM, 50 Taper, 29.5 HP, 40 ATC, Chip Conveyor, Full CNC Controlled Swivel Head, Power Draw Bar | Yes | 1990 Butler Elgamill HE 28363 Heidenhain 355 |
| Cincinnati | 20V-120 | 1989/2007 | 9203 | MACHINING CENTERS, VERTICAL, CNC | Centroid M 400 | Very Good | Yes | 122" x 29.92" Table, 120" x 30" x 24" Travels, +/- 29° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 | Yes | 1989/2007 Cincinnati 20V-120 Centroid M 400 |
| Cincinnati | 20V-80 | 1985/06 | 9204 | MACHINING CENTERS, VERTICAL, CNC | Centroid M 400 | Very Good | Yes | 84.05" x 29.92" Table, 78.74" x 29.94" x 24" Travels, +/- 25° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 | On Way | 1985/06 Cincinnati 20V-80 Centroid M 400 |
| Doosan | DMV-4020 / 40 | 2004 | 8273 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 21iMB | Excellent | Yes | | Yes | 2004 Doosan DMV-4020 / 40 Fanuc 21iMB |
| Fadal | EMC | 2006 | 8886 | MACHINING CENTERS, VERTICAL, CNC | Fadal 32MP CNC | Very Good | Yes | 29.5" x 16" Table, 20" x 16" x 14" Travels, 7,500 RPM, 40 Taper, 10 HP, 16 ATC, Rigid Tapping, RS-232 Port | Yes | 2006 Fadal EMC Fadal 32MP CNC |
| Fadal | VMC-4020 | 1997 | 8668 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 15 HP, 21 ATC, RS-232 Port | Yes | 1997 Fadal VMC-4020 Fadal 88HS |
| Fadal | VMC-4020 | 1997 | 8669 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 15 HP, 30 ATC, 3.5" Disk Drive, RS-232 Port | Yes | 1997 Fadal VMC-4020 Fadal 88HS |
| Fadal | VMC-4020 HT | 1996 | 8221 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Very Good | Yes | 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Tool Load Compensation, Renishaw MP-12 Probe, Chip Conveyor, 422K Extended Memory, Remote Jog Handle, RS-232 Port, Baldor Vector Drives, Fadal Rotary Table With Tailstock And 3" Riser, Fifty (50) Cat 40 Tool Holders, 4th Axis Pre-Wired | Yes | 1996 Fadal VMC-4020 HT Fadal 88HS |
| Fadal | VMC-5020A | 1999 | 7052 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | | Yes | 1999 Fadal VMC-5020A Fadal 88HS |
| Fadal | VMC-6030 | 1991 | 7689 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88 | Good | Yes | 62.5" x 30" Table, 10,000 RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port | Yes | 1991 Fadal VMC-6030 Fadal 88 |
| Fadal | VMC-6030 HT | 1995 | 9397 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | | On Way | 1995 Fadal VMC-6030 HT Fadal 88HS |
| Fadal | VMC-8030 | 2004 | 8884 | MACHINING CENTERS, VERTICAL, CNC | Fadal 32MP CNC | Very Good | Yes | 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 Side Mount ATC, Rigid Tapping, RS-232 Port, Coolant System, 8 MB Expanded Memory, Tsudokoma RN-320R Rotary Table With Tailstock, Remote Jog Handle, New Spindle, 7,500 Power On Hours | Yes | 2004 Fadal VMC-8030 Fadal 32MP CNC |
| Haas | EC-400 | 2005 | 9374 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2005 Haas EC-400 Haas 32 BIT |
| Haas | HS-1RP | 2001 | 8341 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2001 Haas HS-1RP Haas 32 BIT |
| Haas | Mini-Mill | 2001 | 9361 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2001 Haas Mini-Mill Haas 32 BIT |
| Haas | VF-1 | 1997 | 8881 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 1997 Haas VF-1 Haas 32 BIT |
| Haas | VF-1 | 2004 | 9369 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2004 Haas VF-1 Haas 32 BIT |
| Haas | VF-1 | 2004 | 9370 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2004 Haas VF-1 Haas 32 BIT |
| Haas | VF-2 SS | 2005 | 8148 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | 36" x 14" Table, 30" x 16" x 20" Travels, 12,000 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Programmable Coolant, User Definable Macros, Rigid Tapping, High Speed Machining, Remote Jog Handle, 16 Meg of Memory | Yes | 2005 Haas VF-2 SS Haas 32 BIT |
| Haas | VF-3 | 1998 | 9316 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 1998 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2004 | 9371 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2004 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2003 | 9372 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2003 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2005 | 9373 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2005 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2000 | 8369 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | 48" x 18" Table, 40" x 20" x 25" Travels, 7,500 RPM, 20 HP, 40 Taper, 20 ATC, 4th Axis Interface (no tables), Chip Auger, Programmable Coolant, Rigid Tapping, 1 MB Memory, 3.5" Floppy, RS-232 Port, High Intensity Lighting, Spindle Orientation | Yes | 2000 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 B YT / 40 | 2007 | 8301 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Excellent | Yes | | Yes | 2007 Haas VF-3 B YT / 40 Haas 32 BIT |
| Haas | VF-3 SS | 2007 | 8437 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Excellent | Yes | 48" X 18" Table, 12,000 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Rigid Tapping, 3.5" Floppy Drive, Programmable Coolant Nozzel, Two (2) Speed Gear Box, Coordinate Rotation and Scaling | Yes | 2007 Haas VF-3 SS Haas 32 BIT |
| Haas | VF-4 | 2006 | 8186 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2006 Haas VF-4 Haas 32 BIT |
| Haas | VF-4 SS | 2004 | 9021 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2004 Haas VF-4 SS Haas 32 BIT |
| Haas | VF-4 SS | 2005 | 9341 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2005 Haas VF-4 SS Haas 32 BIT |
| Haas | VF-5/50 | 2006 | 8918 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | 52" x 23" Table, 50" x 26" x 25" Travels, 10,000 RPM, 50 Taper, 30 HP, 30 ATC, Programmable Coolant, Rigid Tapping, TR-210 Tilt Rotary Table, 16 MB Program Memory, High Speed Machining With Look Ahead, Remote Pulse Generator, USB Port, 40 Gig Hard Drive, Ethernet Port, Coordinate Rotation & Scaling, Probe Ready Option, Use Definable Macros, Spindle Orientation, Cable Assembly For M-Code | Yes | 2006 Haas VF-5/50 Haas 32 BIT |
| Haas | VF-6/40 | 2001 | 9396 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | On Way | 2001 Haas VF-6/40 Haas 32 BIT |
| Haas | VF-9/50 | 1999 | 8960 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 1999 Haas VF-9/50 Haas 32 BIT |
| Haas | VM-6 | 2008 | 9234 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Excellent | Yes | 64" x 28" Table, 64" x 32" x 30" Travels, 12,000, 40 Taper, 30 HP, 24 ATC, | Yes | 2008 Haas VM-6 Haas 32 BIT |
| Hurco | VM-1 | 2006 | 9217 | MACHINING CENTERS, VERTICAL, CNC | Ultramax Max 32 | Very | Yes | 28" x 14" Table, 26" x 14" x 18.18" Travels, 8,000 RPM, 40 Taper, 15 HP, 16 ATC, Industry NC Software (fanuc), Max Classic Package, Conversational Programming, Touch Screen, Rigid Tapping, Tool Holders, LNS Indexer With Pneumatic Collet Closure, Under 400 Spindle Hours On Machine | Yes | 2006 Hurco VM-1 Ultramax Max 32 |
| Hurco | VMX-64 40T | 2004 | 8024 | MACHINING CENTERS, VERTICAL, CNC | Hurco WinMax | Excellent | Yes | 65.98" x 35.04" Table, 5,997 Table Load, 63.98" , 33.86" x 29.92" Travels, 10,000 RPM, 40 Taper, 24 HP, 24 ATC, Rigid Tapping, Remote Jog Handle, Touch Dual Screen Control, Ultra Pocket Software, Ultradraw DXF Converter - Very Low Hours | Yes | 2004 Hurco VMX-64 40T Hurco WinMax |
| Ikegai | TV-4 | 1991 | 9151 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Good | Yes | | Yes | 1991 Ikegai TV-4 Fanuc OM |
| Kitamura | Mycenter-2 | 1993 | 9403 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Very Good | Yes | | Yes | 1993 Kitamura Mycenter-2 Fanuc OM |
| Leblond-Makino | SNC-64 | 1993 | 9415 | MACHINING CENTERS, VERTICAL, CNC | Fanuc Pro 3 CNC | Good | Yes | | On Way | 1993 Leblond-Makino SNC-64 Fanuc Pro 3 CNC |
| Makino | RMC-55 | 1994 | 7005 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Very Good | Yes | | Yes | 1994 Makino RMC-55 Fanuc OM |
| Matsuura | MC-600-VF | 1994 | 9158 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80 | Needs Repair | Yes | | Yes | 1994 Matsuura MC-600-VF Yasnac I80 |
| Matsuura | MC-760V | 1987 | 9384 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80 | Good | No | | Yes | 1987 Matsuura MC-760V Yasnac I80 |
| Mazak | VTC-16B | 1996 | 8797 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-Plus | Very Good | Yes | 57.5" x 16.1" Table, 44" x 16" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Auto Tool Length Measurement, Rigid Tapping | Yes | 1996 Mazak VTC-16B Mazatrol M-Plus |
| Mazak | VTC-16B | 1998 | 8708 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol Fusion 640 M | Very Good | Yes | 57.5" x 16.1" Table, 44" x 16" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Auto Tool Length Measurement, Rigid Tapping | Yes | 1998 Mazak VTC-16B Mazatrol Fusion 640 M |
| Mazak | VTC-20C | 1998 | 8715 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-Plus | Good | Yes | 79" x 20.08" Table, 65" x 20.08" x 20.08" Travels, 7,000 RPM, 40 Taper, 20 HP, 48 ATC, Conversational Programming, EIA / ISO Input Function, Graphic Display, Rigid Tapping, Chip Conveyor, Center Divider For Running As a Two (2) Station Machine, Fix Table Traveling Column | Yes | 1998 Mazak VTC-20C Mazatrol M-Plus |
| Mighty | Viper VMC-950 | 1999 | 8843 | MACHINING CENTERS, VERTICAL, CNC | Mitsubishi Magic 640 | Very Good | Yes | 50" x 18" Table, 40" x 20" x 24.8" Travels, 8,000 RPM, 40 Taper, 25 HP, 21 ATC, Color Graphic Control, Remote Jog Handle, Chip Auger, Chip Flood Wash System, Hard Drive, Mighty Chip Cart, 3,000 Hours On Machine. Control Completely Rebuilt By Mitsubishi March 2005 | Yes | 1999 Mighty Viper VMC-950 Mitsubishi Magic 640 |
| Mori-Seiki | MV-40 | 1993 | 7995 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80 | Very Good | Yes | 35.3" x 18" Table, 22" x 16.15" x 18.12" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours | Yes | 1993 Mori-Seiki MV-40 Yasnac I80 |
| Mori-Seiki | MV-JR | 1989 | 9383 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80 | Good | No | | Yes | 1989 Mori-Seiki MV-JR Yasnac I80 |
| Mori-Seiki | MV-JR | 1985 | 8742 | MACHINING CENTERS, VERTICAL, CNC | Yasnac MX-2 | Good | Yes | | Yes | 1985 Mori-Seiki MV-JR Yasnac MX-2 |
| Okuma | MC-4VA | 1991 | 8923 | MACHINING CENTERS, VERTICAL, CNC | OSP-5000M | Good | Yes | | Yes | 1991 Okuma MC-4VA OSP-5000M |
| Okuma | MC-4VA | 1992 | 8924 | MACHINING CENTERS, VERTICAL, CNC | OSP-5000MG | Good | Yes | | Yes | 1992 Okuma MC-4VA OSP-5000MG |
| Okuma | MC-5VA | 1992 | 8925 | MACHINING CENTERS, VERTICAL, CNC | OSP-5020M | | | | | 1992 Okuma MC-5VA OSP-5020M |
| Quantum | Q-1250 V | 1999 | 7954 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 18M | Very Good | Yes | | Yes | 1999 Quantum Q-1250 V Fanuc 18M |
| Rambaudi | Rammatic 1400 | 1990/05 | 6373 | MACHINING CENTERS, VERTICAL, CNC | Siemens 802D | Good | Yes | | Yes | 1990/05 Rambaudi Rammatic 1400 Siemens 802D |
| Sharnoa | HPM-40 | 1997 | 7761 | MACHINING CENTERS, VERTICAL, CNC | Tiger 6 | Very Good | Yes | | Yes | 1997 Sharnoa HPM-40 Tiger 6 |
| Sharnoa | SV-36 | 1990 | 7757 | MACHINING CENTERS, VERTICAL, CNC | Tiger 5 | Very Good | Yes | | Yes | 1990 Sharnoa SV-36 Tiger 5 |
| Supermax | Max-1 Rebel | 1998 | 8875 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Very Good | Yes | | Yes | 1998 Supermax Max-1 Rebel Fanuc OM |
| Rockford | 36" x 21" | 1953 | 8848 | MILLERS, PLANER TYPE (Including Millers, Slab) | | Very Good | Yes | | Yes | 1953 Rockford 36" x 21" |
| Bridgeport | Series I | 1982 | 5758 | MILLERS, UNIVERSAL | | Fair | Yes | | Yes | 1982 Bridgeport Series I |
| Birmingham | B3VS | 2002 | 8704 | MILLERS, VERT-UNIVERSAL NC and CNC | Centroid M 400 | Very Good | Yes | 60" x 12" Table, 41" x 20" x 23" Travels, 5,160 RPM, 5 HP, 40 Taper, Engraving Software, Hard Drive, 128 MB Ram, RS-232 & Ethernet Ports, Inverter Drive System, 3.5" Floppy, Remote Jog Hand Wheel for X, Y, Z & 4th, Power Draw Bar, Digitizing Probe & Software, TT-1 Probe for Tool Measuring, Unlimited File Size Software, BobCadCam Design Software, Laser Mapping of Ballscrews ISO 1725 Certification | Yes | 2002 Birmingham B3VS Centroid M 400 |
| Hurco | Hawk 40 Advantage Series | 1998 | 9042 | MILLERS, VERT-UNIVERSAL NC and CNC | Ultramax IV/Dual CRT | Good | Yes | 58" x 13" Table, 40" x 20" x 20" Travels, 4,000 RPM, 5 HP, Power Draw Bar, Hardened and Ground Box Ways, DFX Translator | Yes | 1998 Hurco Hawk 40 Advantage Series Ultramax IV/Dual CRT |
| Tree | Journeyman 325 | 1985 | 7853 | MILLERS, VERT-UNIVERSAL NC and CNC | Delta Dynapath 20M/CRT | Good | Yes | 44" x 10" Table, 27" x 14" x 6" x 15.75" Travels, 6,000 RPM, 5 HP, 40 Taper, 4th Axis Rotary Table | Yes | 1985 Tree Journeyman 325 Delta Dynapath 20M/CRT |
| Carr Lane | Zero-Point Mounting System | 2006 | 8672 | MISCELLANEOUS COMPONENTS | | Very Good | Yes | | No | 2006 Carr Lane Zero-Point Mounting System |
| Stocker and Yale | 11 MDA-210 | 1962 | 5336 | MISCELLANEOUS COMPONENTS | | Excellent | Yes | Stocker & Yale 11 MDA-210 | Yes | 1962 Stocker and Yale 11 MDA-210 |
| De Dietrich | Mixer | 1988 | 8618 | MIXERS, LIQUID | | Good | Yes | | Yes | 1988 De Dietrich Mixer |
| Buffalo | 2 VBR | 1975 | 8829 | ROLLS, ANGLE BENDING | | Good | Yes | | Yes | 1975 Buffalo 2 VBR |
| Roundo | R-13-S | 1996 | 9170 | ROLLS, ANGLE BENDING | | Very Good | Yes | Angle Bend Capacity - 8" x 8" x 1 - 1/4", Diameter of Bending Rolls 32", 108 HP, Large Selection of Dies For Pipe and Beams, Large Selection of Spacers, Oversized Shaft, Motors & Drive, Hydraulically Controlled Guide Rolls - Up / Down / In & Out, Full Pendant Control, Five (5) Sets of Pipe Rolls | Yes | 1996 Roundo R-13-S |
| Cole-Tuve | 4RS-10-380 | 2009 | 8720 | ROLLS, PLATE BENDING, INITIAL PINCH | | New | No | | Yes | 2009 Cole-Tuve 4RS-10-380 |
| Cole-Tuve | PRH-10-380 | 2009 | 8664 | ROLLS, PLATE BENDING, INITIAL PINCH | | New | Yes | | | 2009 Cole-Tuve PRH-10-380 |
| Webb | 6L | 1956 | 8735 | ROLLS, PLATE BENDING, INITIAL PINCH | | Very Good | Yes | 6' Roll Length, 1/2" Mild Steel Cap. 9" Roll Dia., 10 HP, Three (3) Rolls Power Driven, Magnetic Brake Motor, Variable Rolling Speed, Rear Roll Adjust, Manual Pinch Roll Adjust, Drive System Work Done On Machine Recently, Machine Is Tight and Right | Yes | 1956 Webb 6L |
| AXYZ Automation | Model 4010 | 2003 | 6729 | ROUTERS, NC and CNC | | Good | Yes | 168" x 16" Table, 150" x 16" x 18" Travels, 24,000 RPM, 30 Taper, 10 HP, Fog Buster Dual Wand Mister Lubricator, Desoutter AFDE430 Electric Drill with Pneumatic Ram, S-Mouse Rapid Material Surface / Tool Tip Sensor, Toolpath For Windows Interface Software C/W 2D & 3D Engraving Module, Remote Jog Handle | Yes | 2003 AXYZ Automation Model 4010 |
| Do-All | C-80 | 1975 | 9323 | SAWS, BAND, HORIZONTAL | | Good | Yes | 9" x 16" Capacity, 10 3/4" Round, 275 FPM, 2 HP, Work Light, Manual Vise, In-Feed Roller Table | Yes | 1975 Do-All C-80 |
| Sharp | 250A | 2005 | 8487 | SAWS, BAND, HORIZONTAL | | Very Good | Yes | | Yes | 2005 Sharp 250A |
| HEM | V-150A | 1990 | 8712 | SAWS, BAND, VERTICAL | | Very Good | Yes | Capacity 90° - 20" x 25", Round 20", Capacity 45° - 20" x 18", Round 18", 45° Head Tilt, 10 HP Drive Motor, 5 HP Hyd. Motor, Solid State Programmable Logic Controller, Chip Conveyor, Variable Frequency Drive, Power Tilt, Automatic Stock Feed In-Feed Roller Table, Power Raised Lift Up Rollers On Both Sides of Saw, Full Stroke Vises, Material Jog Feature, Hydraulic Material Clamp, Coolant System, Power Blade Tension, LED Blade Read-Out, 3rd Holding Vise, | Yes | 1990 HEM V-150A |
| Macc | NTS-350 | 1999 | 6763 | SAWS, COLD and CARBIDE | | Good | No | Material Thickness Round Bar 3.937", Round Tube 4.724", Square 3.937", Rectangle 6.7" x 3.937", 14" Blade Diameter, Swivel Head, Automatic Operation, Automatic Vice Open and Close | Yes | 1999 Macc NTS-350 |
| Allsteel | 20' x 3/4" | 1980 | 9146 | SHEARS, HYDRAULIC | | Very Good | Yes | 20" Bed, 3/4" Mild Steel Cap., 1/2" Stainless Cap., 60 HP, Three (3) 36" Front Sheet Supports, Fourteen (14) Independent Hydraulic Holddowns, Finger Guards, T-Slotted Bed | Yes | 1980 Allsteel 20' x 3/4" |
| Haas | HA-5C | 2006 | 8673 | TABLES, NC and CNC | | Good | | | No | 2006 Haas HA-5C |
| Haas | HA-5C | | 8447 | TABLES, NC and CNC | | Good | Yes | | Yes | Haas HA-5C |
| Haas | HA-5C4 | 2001 | 9022 | TABLES, NC and CNC | | Good | Yes | | Yes | 2001 Haas HA-5C4 |
| Haas | HRT-310 | 1999 | 7040 | TABLES, NC and CNC | | Good | Yes | 12.2" Round Table, Indexing 360,000°, Brush Servo | Yes | 1999 Haas HRT-310 |
| Haas | HRT-310 & HRT-210 | | 7994 | TABLES, NC and CNC | | Very Good | Yes | | Yes | Haas HRT-310 & HRT-210 |
| Haas | HRT-450 | 2006 | 8154 | TABLES, NC and CNC | | Like New | Yes | 17.7" T-Slotted Table, 7.5" Center Hole, 12" 3-Jaw Chuck, Manual Tailstock, Brushless Style | Yes | 2006 Haas HRT-450 |
| Haas | TR-110 | 2001 | 9023 | TABLES, NC and CNC | | Very Good | Yes | | Yes | 2001 Haas TR-110 |
| Kitagawa | TR-320 | 2003 | 5081 | TABLES, NC and CNC | | Excellent | Yes | 12.60" Table, 3.93" Through Hole, 11.1 RPM | Yes | 2003 Kitagawa TR-320 |
| Ohio | 72" | 1968 | 7101 | TABLES, NC and CNC | | Very Good | Yes | Table Size (T-Slotted) - 72", 360,000°, Full Brake, Shot Pins at 90° | Yes | 1968 Ohio 72" |
| Troyke | U-18 | | 8677 | TABLES, ROTARY | | Very Good | | | Yes | Troyke U-18 |
| Dual-Draw | BG3048-AL | 2005 | 8895 | TABLES, WELDING | | Excellent | Yes | | Yes | 2005 Dual-Draw BG3048-AL |
| Precitech Precision | FMS 8150 | 2002 | 8328 | TESTERS, ROUNDNESS | | Very Good | Yes | | Yes | 2002 Precitech Precision FMS 8150 |
| Sweco | FC-70 | 1977 | 7105 | VIBRATORS (Incl. Vibratory Finishers) | | Good | Yes | Bowl Capacity - 70 Cubic Feet, Barrel Diameter - 92", 20 HP, Internal Separation / Automatic Unloading, Polyurethane Lined Bowl, Additional 10" Collar Added to the Top | Yes | 1977 Sweco FC-70 |
| Matrix | Bowl Feeder | | 8196 | VIBRATORY FEEDERS | | Excellent | Yes | | Yes | Matrix Bowl Feeder |
| Miller | Syncrowave 350 LX TigRunner | 2004 | 8897 | WELDERS, TIG | | Very Good | Yes | | Yes | 2004 Miller Syncrowave 350 LX TigRunner |
| U.S. Tool Company | #33 Multi-Slide | | 8421 | WIRE MACHINERY, FORMING | | Very Good | Yes | Maximum Stock Width 2 1/2", Maximum Stock Thickness 3/32", Maximum Feed Length 12 1/2", 40 - 160 SPM, 5 HP, Twelve (12) Channel Touch Screen Control, Vari Drive (like new), Air Clutch and Brake, Two (2) Press Heads, One (1) Double Length Bolster, One (1) Box of Accessories, Rack & Pinion Stripper Head, Front Cut Off Unit, Vacuum System for Slugs, Positive Check Feed, Stock Mister | Yes | U.S. Tool Company #33 Multi-Slide |