Below are the specs we have on file for this
machine. Please contact Machine Tools 24/7 if
you have any questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 9863 | 2010 | Amera-Seiki | VT-1600 ATC | Fanuc 18iTB |
| | Description | Spec Values |
| Capacity: | Table Diameter / Table Load | 63" / 15,589 Lbs |
| | Maximum Swing / Maximum Turning Diameter | 78.74" / 78.74" |
| | Maximum Turning Height | 63" |
| Spindle: | Speeds (2-Speed Gear Box) | 2 - 256 RPM |
| | Motor | 100 HP |
| Head(s): | Number of Heads | One |
| | Type Head(s) / Taper | Ram Head / 50 Taper |
| | Tool Changer | 12 ATC |
| Travels: | X-Axis Vertical / Horizontal Ram Travel | 39.4" / 117" |
| | Vertical Travel of Rail Head | 29.50" |
| Rapids: | Rapid Traverse (X & Z) | 393 IPM |
| Dimensions: | Floor Space (L x W x H) | 216” x 157” x 216" |
| | Weight (approx.) | 86,500 Lbs |
| | Equipped With |
| Additional Info.: | 63" 4-Jaw Manual Chuck |
| | Coolant Through Tool |
| | Extra Coolant System With Paper Filter |
| | Chip Conveyor |
| | Oil Skimmer |
| | ZF Gearbox With Chiller |
| | Coolant Chip Flush |
| | Full Enclosure Guarding |
| | Air Conditioner for Electrical Cabinet |
| | Navigation System for Crossrail |
| | Spindle Gearbox With Chiller |
| | Heidenhein Scales |
| | Fanuc Manual Guide I Shop Floor Programming |
| Click Here To Print Quote - | 9863 |
| Click Here To Email Quote Request - | 9863 |
Take advantage of New IRS Tax Code Section
179 Depreciation says that for new and used machinery purchases up
to $250,000 may be expensed in the first year…
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes.
