Below are the specs we have on file for this
machine. Please contact Machine Tools 24/7 if
you have any questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 9243 | 2002 | Okuma | Captain L-370 MW BB | OSP-E100L |
| | Description | Spec Values |
| Capacity: | Swing / Swing Over Cross Slide | 20.08" / 16.54" |
| | Maximum Turning Diameter / Maximum Turning Length | 14.56" / 20.47" |
| | Distance Between Centers | 24" |
| Main Spindle: | Spindle Speeds Minimum - Maximum | 40 - 3,800 RPM |
| | Spindle Bore / Bar Capacity / Nose | 3.3" / 3" / A2-8 |
| | Main Motor (30 min / continuous) | 20 / 15 HP |
| Sub Spindle: | Speeds | 180 - 4,000 RPM |
| | Spindle Bore / Bar Cap / Spindle Nose | 1.22" / .85" / A2-6 |
| | Motor (30 min / continuous) | 10 / 7.5 HP |
| Turret: | Number of Positions | 12 Positions |
| | Indexing Time (1 Step / Full Step) | 0.4 Sec / 1.3 Sec. |
| Travels: | X-Axis Travel | 7.12" |
| | Z-Axis Travel | 24.5" |
| | B-Axis Travel (sub-spindle) | 19.7" |
| | C-Axis Indexing | 360,000° |
| Rotary Tools: | Rotary Tool Speed | 20 - 4,500 RPM |
| | Rotary Tool Motor (30 min. / continuous) | 7.5 / 5 HP |
| Rapids: | Rapid Traverse (X / Z) | 984 / 787 IPM |
| Dimensions: | Floor Space | 107" x 70" x 86" |
| | Weight (approx) | 10,000 Lbs |
| | Equipped With |
| Additional Info.: | 10" 3-Jaw Hydraulic Chuck Main, 6" 3-Jaw Hydraulic Chuck Sub |
| | Turbo Chip Conveyor |
| | Tool Presetter |
| | One Touch IGF |
| | Parts Catcher |
| | Sub-Spindle Parts Ejector |
| | Additional M Codes |
| | Six (6) Live Tool Holders |
| Note: | 7,800 Cutting Hours |
| Click Here To Print Quote - | 9243 |
| Click Here To Email Quote Request - | 9243 |
Take advantage of New IRS Tax Code Section
179 Depreciation says that for new and used machinery purchases up
to $250,000 may be expensed in the first year…
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes.
